Ive finally sat down and crunched some numbers, took a look at my stock, and adjusted my schedule to give a lot of time to EvilWerks, and have come up with an offering to the 914 family! Fully rebuilt cores! Thats right, you dont have to send me anything. You can, but you dont have to. I looked at the "competition" and laughed at the prices they were charging for what they are offering and I can destroy their prices with providing ALL new parts.
Some caveats, though:
- I will only be doing these once in a while when my commissioned rebuilds have a lul.
- Parts prices fluctuate so prices can bounce around a little over time.

What my complete builds will include:
Synchro rings 91130230106
1st dog teeth 90130224106
2-5 teeth 101550315
1/R slider 91130222600
2-5 sliders 91130241110
Pinion ball bearing 9990520160A
Pinion roller bearing 99911001201
Input shaft ball bearing 99905302501
Input shaft roller bearing 99911000800
Diff bearing 99905902700
Shift fork 1/r 90130315101
Shift fork 2/3/4/5 90130311101
TOB guide tube 90111608711
Gasket kit, mag 91430090100
Int plate plug 99906500402
Case vent 90430107100
Bolt for speedo drive 90131827203
Fork clevis ball 90111677101
Fill plug, male 99906400702
Drain plug, male 99906400802
TOB spacers 90111682511
Reverse switch 91461354102
Reverse switch pin 90130301702
Ground strap 99961191920
Clutch fork clevis 90111607701
Console bushing 91442422402
Cup bushing, console 91142413901
Clutch fork cup 90111674101
Case cleaning (can treat with protectant or leave bare for you to paint)
New hardware
Core charge ($500 of the $5350, can be recovered!)
Shipping (to the lower 48 states, all others need to contact me)

All of this for $5350! If you send me a core that doesnt suck, you can get up to $500 back. The competition has a much larger core charge and primes you to get none of it back stated right on their site. At least they are trying to be honest.

So, if you are interested in reserving the first of these, @ me here or DM me or email me at MakeMy914Go at Yahoo.

(PS: This is a far higher cost than my standard rebuilds, which I still do a lot of, so dont be scared off!)