Hi was hoping that someone could supply a picture of the small spring and mount at the equalizer end of the e brake TIA Dennis

It is not used on early cars. Dont have a picture but it hooks to a loop on the firewall under the tab that the cover screws into. Other end hooks to the offset tab on tbe equalizer assembly.

Yes mine is a 74 replaced lower firewall and e brake conduits but have no idea what the loop and tab look like or the cover over equalizer

Here's the assembly

Here is the cover. I am selling this one in the classifieds now.

Click to view attachment

Equalizer plate is installed with 'oben' facing up

Looks like someone installed the spring to add extra tension... or the hook at the end broke off.

If you need it got everything, including new cables. except got a whole kit including cables. On sale in hours, and a free 914 calender (while they last)


https://914rubber.com/parking-brake-cable-kit-for-914

Or you can get just what you need individually.

@Krieger

Not quite correct. You have the spring hooked thru the hole that is for a screw to hold the cover. And the part it connects to on the equalizer should come in from the top with tbe offset downward. The other end of the spring hooks to a loop on the firewall under the tab to which you have it connected.

Thanks but already purchased the rest from you!

Thank you for the help

Thanks that’s what I needed to know

Whoops! That's a mistake I made about 22 years ago...