Emphasis on cheap!

It would be nice to get the horn button that goes with it.

Looking for stock not aftermarket.

Doesn’t need to be perfect, just cheap!

Thanks.
Post a pic here and PM a price with shipping to 93465.

This is from a 75 I no longer have

Still looking

Did I mention I need a cheap wheel?
Like $50-$75 shipped.

Low buck to move a roller.

Will the wheel off a 70 fit?

I think so. Maybe one of the experts here can chime in.

Yeap, early would be fine for your roller.

Vice grips are your low buck friend here!

I’d go with the vise grips, or double nut the column. Let me know if you want this wheel.

Thanks Sergio

PM sent on the wheel.

Vise grips -so VW mechanic.

I thought 70 to 71 wheels were different than 72 and up to 75. I know if you’re trying to buy hub adapters for 70 is different than 71 and up. Don’t know what the difference is. I just know there is a difference

Difference lies in the hub and its horn/signal cancel ring:

Early ’70-’71 w/ “.10” p/nsteering wheel (preferred for pre-‘74 911)
- deep hub with steel signal cancel tang (B) and hub without tang for wire (2):

’72-'76 w/ ".11" p/n steering wheel
-short hub with brass horn contact/plastic signal cancel tang (A) and hub with tang for wire

Since its for a roller, horn/signal contact is not a consideration.

Still looking.
Somebody must have one that sat outside in the sun and snow for a few years.

I have a wheel from a '75 that is sun kissed with all the patina you have been craving.

Click to view attachment

Click to view attachment

Click to view attachment

Couple more pics...

Click to view attachment

Click to view attachment