Geezer914
Apr 19 2024, 01:50 PM
What should be the ride height difference front to rear or the "rake" measuring from the rocker panel or jacking donuts?
Geezer914
Apr 19 2024, 02:08 PM
From the rocker panel f to r or jack donuts?
johnhora
Apr 19 2024, 03:49 PM
measure at the jacking donuts
Dave_Darling
Apr 20 2024, 03:48 AM
Whatever you want it to be.
The original US spec was fairly nose-high, supposedly for US headlight or bumper height regs. Original European spec was more level.
I suggest setting it where you think it looks right.
--DD
Cairo94507
Apr 20 2024, 07:58 AM
Personally, I like the nose down a little bit. They did come stock with the nose up in the air.
Retroracer
Apr 20 2024, 09:22 AM
I've found this to be a great reference & starting point:
http://www.914world.com/bbs2/index.php?act...t&id=363723FYI
- Tony
Literati914
Apr 20 2024, 10:37 AM
QUOTE(Retroracer @ Apr 20 2024, 10:22 AM)
I've found this to be a great reference & starting point:
http://www.914world.com/bbs2/index.php?act...t&id=363723FYI
- Tony
Thanks for posting this ^^ I was wondering if someone had done a write up on the subject