yeahmag
Nov 4 2005, 10:05 PM
Anybody buy the P/C Kits from www.type4parts.com?
The nickie kits they have are nicely priced:
http://www.type4parts.com/pd_96mm_forged.cfm-Aaron
Series9
Nov 4 2005, 10:07 PM
This should be fun....
Engman
Nov 4 2005, 10:09 PM
Don't go there.
Enough said.
M
McMark
Nov 4 2005, 10:52 PM
Do not support a person who has criminal-like behavior.
His name is Steve Stromberg. Do a search.
Bad peoples.
Eric_Shea
Nov 4 2005, 10:57 PM
Hmmmmmmm... anyone else smell onions?
ws91420
Nov 4 2005, 11:03 PM
LMAO at the dead horse smiley Eric
Mueller
Nov 4 2005, 11:26 PM
what the heck are
cyliners???
Aaron Cox
Nov 4 2005, 11:31 PM
silver spraypaint on some honed out 94's?
steve is a crook. stop doing this you choad. ruining a community
bd1308
Nov 4 2005, 11:37 PM
LMAO Aaron....chode!
stromberg is like a genius of foolery. sure i'll build you a engine. what he doesnt tell you is that heads are used, valves are bent and he's put in double springs to counteract that valve bend...oh and he wants 6K for the engine.
if you want a work of art, stromberg quality...i have a 2.0 for you.
no seriously. i wouldn't buy a goldfish from the guy. I sure as HELL wouldn't buy a engine from him. word on the streets is that his specialized machine shop is a set of drills on momma's kitchen counter.
b
Aaron Cox
Nov 4 2005, 11:40 PM
Aaron - if something is way too good to be true. IT IS.
unfortunately the guy is a complete thief. do not deal with him. ever.
seanery
Nov 5 2005, 12:05 AM
courtesy of eric shea : deadhorse : remove spaces
smac
Nov 5 2005, 01:43 AM
Hammy
Nov 5 2005, 01:53 AM
Awesome!
balthazar
Nov 5 2005, 05:17 AM
How come Jake still sells them?
davep
Nov 5 2005, 07:19 AM
QUOTE (balthazar @ Nov 5 2005, 03:17 AM) |
How come Jake still sells them? |
Cause Jake's are the real deal, and you have to pay for quality.
Thorshammer
Nov 5 2005, 09:03 AM
I am also a Nickies dealer if you would like me to price them for you, please PM me.
Erik Madsen
Madsen Engineering
azbill
Nov 5 2005, 09:06 AM
These are hot off the boat from China. He gets them from a company northeast of LA. The same company sells Nikasil's for the 6's. Who knows what the quality is. What is plating process and thick is it. Who has run them for how long. I was offered them - no thank you.
PS
They are forged not machined. What are the properties of the aluminum? Again who knows. Don't ask he sure as hell dosen't but fill you with bulls**t.
charlesmac
Nov 5 2005, 09:18 AM
But they come with 24mm wist pins. How can you pass that up?
Jake Raby
Nov 5 2005, 09:28 AM
Sweet...
Looks like it's time to get some and get out the precision measuring devices and have some fun!
Anyone wanna guess what we'll find??
It amazes me that he is still in business!
bd1308
Nov 5 2005, 10:34 AM
QUOTE (Jake Raby @ Nov 5 2005, 09:28 AM) |
Sweet...
Looks like it's time to get some and get out the precision measuring devices and have some fun!
Anyone wanna guess what we'll find?? It amazes me that he is still in business! |
it AMAZES me he's still running his site.....
I should run a denial of service attack on his site
b
davep
Nov 5 2005, 10:46 AM
QUOTE (bd1308 @ Nov 5 2005, 08:34 AM) |
I should run a denial of service attack on his site |
And the reason you haven't is????
airsix
Nov 5 2005, 10:47 AM
Forged? How can you forge a finned cylinder? You have to cast it or machine it unless it's made from more than one piece.
-Ben M.
bd1308
Nov 5 2005, 10:47 AM
a person needs like 2,000 computers to run a DoS attack. this is usually accomplished by those pesky "trojan horse" programs that you all find on your windows computers.
b
davep
Nov 5 2005, 10:56 AM
QUOTE (bd1308 @ Nov 5 2005, 08:47 AM) |
a person needs like 2,000 computers to run a DoS attack. |
So, are you looking for 2000 members to volunteer their computers to a good cause for a while?
Gint
Nov 5 2005, 10:57 AM
I think it's actually "choad".
bd1308
Nov 5 2005, 10:59 AM
we'll see......
b
Aaron Cox
Nov 5 2005, 11:11 AM
QUOTE (Gint @ Nov 5 2005, 09:57 AM) |
I think it's actually "choad". |
minor hijack.... but it CAN be spelled both ways. CHOAD being preffered over chode
this public service announcement brought to you by:
the people against trade with steve stromberg
bd1308
Nov 5 2005, 11:15 AM
QUOTE (Aaron Cox @ Nov 5 2005, 11:11 AM) |
QUOTE (Gint @ Nov 5 2005, 09:57 AM) | I think it's actually "choad". |
minor hijack.... but it CAN be spelled both ways. CHOAD being preffered over chode
this public service announcement brought to you by: the people against trade with steve stromberg |
yep.
actually there are several definitions for this (www.urbandictionary.com)
but i know which one applies here.
b
yeahmag
Nov 5 2005, 11:25 AM
sorry... I knew of Steve, but never managed to figure out that he was type4parts.com.
-Aaron
TROJANMAN
Nov 5 2005, 11:45 AM
great, now i am going to go back and edit all of threads that
greenie
Nov 5 2005, 11:59 AM
Calling.......... " Rhody Guy"
Hi Kevin ! !
Greenie
davep
Nov 5 2005, 12:05 PM
QUOTE (TROJANMAN @ Nov 5 2005, 09:45 AM) |
great, now i am going to go back and edit all of threads that |
You are going to be busy for a very long time, and the server may fail under the load of edits.
Brando
Nov 5 2005, 01:31 PM
So, who's a member of the
Stromberg-Watch? Kind of like the neighborhood watch...
bd1308
Nov 5 2005, 02:30 PM
OH OH OH OH!!!
i'll do it!
but wait, isn't he already banished from here and from PP?
b
cnavarro
Nov 5 2005, 05:04 PM
Maybe he's helping keep the landfills free of soda cans. They'd sure make a great recycled "cyliner". Or even better aluminum "colored". Don't you have one of those on your junk pile Jake?
Jake Raby
Nov 5 2005, 06:43 PM
I think I'll buy a set and dump 30 pounds of boost to them and see if I can split them like a piece of Hickory....
Then I'll send them back and see what his warranty is like!
(I'm not kidding, who wants to be the middle man for me so I can get my hands on a set and destroy them?)
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.