Help - Search - Members - Calendar
Full Version: JOEs BBQ
914World.com > The 914 Forums > 914World Garage
Pages: 1, 2
TROJANMAN
seems we have a lot of people selling and looking for parts in the other thread, so i thought we could start a separate thread to address those needs. wink.gif
given the fact that most of so cal will be there, i would think many parts could be bought, traded, and sold.

i need droplinks and hardware for my weltmeister front swaybar biggrin.gif anyone?

oh ya, and where are the norcal folks? cool.gif

TINCAN914
Greg, I need a rear trunk lid, think you can fit one of those in the overhead on the plane? biggrin.gif I owe you a beer, c-ya Saturday..

Joe tells me he has one, but not sure of the condition... I'm sure it's better then the one I have now..
Howard
I'll trade * for a future draft pick.
TROJANMAN
QUOTE (Howard @ Feb 14 2006, 12:50 PM)
I'll trade * for a future draft pick.

usually an * means "see below"

so after looking below, i would gladly trade you a future draft pick for suzy biggrin.gif
Howard
QUOTE (TROJANMAN @ Feb 14 2006, 12:52 PM)
QUOTE (Howard @ Feb 14 2006, 12:50 PM)
I'll trade * for a future draft pick.

usually an * means "see below"

so after looking below, i would gladly trade you a furutre draft pick for suzy biggrin.gif

Good try, rubberboy. The offer is still on. *
Other acceptable trades:
D cell batteries
Kaopectate
Nascar stickers
47 Buick hood ornament
Stuckey's pecan roll











* in SoCal speak = Mike Z.
MoveQik
Well shit Greg...my conversion just got really easy. Would one of you guys bring a low mileage 3.2 that runs perfect? Thanks!

I would be willing to discuss engines other than a 3.2 on a case by case basis. I figure I should have this wrapped up in a few days. screwy.gif
TROJANMAN
weren't you the one asking for a jack in the other thread?
jackass biggrin.gif

mike, have you thought about a suby conversion? idea.gif
914-8
I have a rear trunk lid that I'll be getting rid of soon (probably next couple of weeks).

It is in good condition. It did have some holes drilled in it at one point that have been filled. It is standard L041 black, is in good enough shape to use as it is.

I'll let it go cheap!

MoveQik
QUOTE (TROJANMAN @ Feb 14 2006, 01:07 PM)
mike, have you thought about a suby conversion? idea.gif

Yes, I have my eye on a pristine motor that just came out of a 1977 Subaru Brat.
Flat VW
QUOTE (MW 914 @ Feb 14 2006, 02:03 PM)
Well shit Greg...my conversion just got really easy.  Would one of you guys bring a low mileage 3.2 that runs perfect?  Thanks!

I would be willing to discuss engines other than a 3.2 on a case by case basis.  I figure I should have this wrapped up in a few days. screwy.gif

Put me down for a Tangerine Evo header, no heat exchangers, complete phase II kit please, ceramic coated, color does not matter, I'm not picky. happy11.gif

On a more serious note I could use some #1 condition exterior door handles... idea.gif

John
MoveQik
On a serious note...I could use some visors.
Gint
I need all of the heater tubes for the passenger side under the motor from the exchangers to the bulkhead. 1.8 if it makes a difference, but I don't think it does.

I need 4, 17, 22, 25, 26 and 9 (flapper box). And the mounting bolts for same of course.
TonyAKAVW
I have some flapper boxes, I'll bring them by. I have to be in San Diego by 3, so I'll be there earlyish.

Also have a set of visors. Not in CW condition, but useable.

-Tony
Aaron Cox
i need teh three rear targa trim pieces.... the chrome ones...
MoveQik
QUOTE (TonyAKAVW @ Feb 14 2006, 03:57 PM)
Also have a set of visors. Not in CW condition, but useable.

-Tony

I'll take a look at them if you don't mind. My car is far from CW.
TonyAKAVW
Aaron: I have some. I am not sure I have a complete set, but i'll take a look.


-Tony
Aaron Cox
QUOTE (TonyAKAVW @ Feb 14 2006, 05:38 PM)
Aaron: I have some. I am not sure I have a complete set, but i'll take a look.


-Tony

wicked! smiley_notworthy.gif
d7n7master
biggrin.gif Joe's BBQ/Swapmeet? smilie_pokal.gif
2 cool -
So I should consider bringing my used 2.0, 3 stud heads 4/sale or trade?
sixnotfour
QUOTE
Well shit Greg...my conversion just got really easy. Would one of you guys bring a low mileage 3.2 that runs perfect? Thanks!

I would be willing to discuss engines other than a 3.2 on a case by case basis. I figure I should have this wrapped up in a few days.  


There is 1 3.2 -6 on pelican parts , other 2 are sold

http://forums.pelicanparts.com/showthread....threadid=266665
TROJANMAN
hey mike, were you nappin on the job? slap.gif

anyone have droplinks for a front weltmeister and stock rear sway bar?
MoveQik
QUOTE (sixnotfour @ Feb 16 2006, 04:34 PM)
There is 1 3.2 -6 on pelican parts , other 2 are sold

http://forums.pelicanparts.com/showthread....threadid=266665

Check the thread on PP. I have been talking to the seller about it already. wink.gif

Thanks to LVSteveH in Vegas for the tip yesterday. The seller claims I am first in line on it right now pending leakdown #'s.
Flat VW
QUOTE (Flat VW @ Feb 14 2006, 02:20 PM)
QUOTE (MW 914 @ Feb 14 2006, 02:03 PM)
Well shit Greg...my conversion just got really easy.  Would one of you guys bring a low mileage 3.2 that runs perfect?  Thanks!

I would be willing to discuss engines other than a 3.2 on a case by case basis.  I figure I should have this wrapped up in a few days. screwy.gif

Put me down for a Tangerine Evo header, no heat exchangers, complete phase II kit please, ceramic coated, color does not matter, I'm not picky. happy11.gif

On a more serious note I could use some #1 condition exterior door handles... idea.gif

John

icon_bump.gif
KaptKaos
I'll trade some beer for some wisdom and experience. My 1.7 is not running too well and I could use a hand with sorting it out.
SLITS
QUOTE (KaptKaos @ Feb 16 2006, 06:51 PM)
I'll trade some beer for some wisdom and experience.  My 1.7 is not running too well and I could use a hand with sorting it out.

Frome the SoCal Contingent...you are a dreamer av-943.gif
KaptKaos
QUOTE (SLITS @ Feb 16 2006, 05:54 PM)
QUOTE (KaptKaos @ Feb 16 2006, 06:51 PM)
I'll trade some beer for some wisdom and experience.  My 1.7 is not running too well and I could use a hand with sorting it out.

Frome the SoCal Contingent...you are a dreamer av-943.gif

Well I wasn't asking YOU! lol2.gif
cbenitah
I'm coming up running on 3 strong cylinders.. who knows, I may even try that 4th on the ride home..
Mugs914
Anyone got one of these spoilers they wanna get rid of?

...Cheap? smile.gif

...Um, Reasonable? biggrin.gif

...Why is everyone laughing? av-943.gif
TROJANMAN
looking for a spare throttle cable too. wink.gif (just in case)

and a fuel filter chairfall.gif
Gint
QUOTE (SLITS @ Feb 16 2006, 06:54 PM)
QUOTE (KaptKaos @ Feb 16 2006, 06:51 PM)
I'll trade some beer for some wisdom and experience.  My 1.7 is not running too well and I could use a hand with sorting it out.

Frome the SoCal Contingent...you are a dreamer av-943.gif

Aw come on now. If I get enough beer I get real wise. drunk.gif
MoveQik
QUOTE (Gint @ Feb 16 2006, 07:00 PM)
Aw come on now. If I get enough beer I get real wise. drunk.gif

This could be a whole mass of brain power. I happen to know for a fact that I am the smartest guy I know when I am drunk. laugh.gif
Aaron Cox
mike PM sent
Allan
QUOTE (Aaron Cox @ Feb 16 2006, 07:19 PM)
mike PM sent

av-943.gif dead horse.gif

I hope the weather holds out... driving.gif
Gint
QUOTE (Headrage @ Feb 16 2006, 08:31 PM)
QUOTE (Aaron Cox @ Feb 16 2006, 07:19 PM)
mike PM sent

av-943.gif dead horse.gif

I hope the weather holds out... driving.gif

Don't wuss out on me now. I want to meet you. I've met a lot of the SoCal gang, but never you Allan.

Actually that goes for the rest of you spoiled Californians too.

I'll be there, rain or shine. wink.gif beer.gif

jsharp.gif
brant
don't forget little ole me...
I'm looking for a 150mph speedo please

brant
Howard
I was bringing one promised to some dork in Colorado. Wanna out bid him? biggrin.gif
Gint
QUOTE (brant @ Feb 16 2006, 08:44 PM)
don't forget little ole me...
I'm looking for a 150mph speedo please

brant

Are you coming with us Brant?!?!
SLITS
QUOTE (Gint @ Feb 16 2006, 09:21 PM)
QUOTE (brant @ Feb 16 2006, 08:44 PM)
don't forget little ole me...
I'm looking for a 150mph speedo please

brant

Are you coming with us Brant?!?!

Oh shit....there goes the neighborhood sad.gif

Who's lap is he gonna ride on gayfight.gif
Aaron Cox
QUOTE (SLITS @ Feb 16 2006, 09:44 PM)
QUOTE (Gint @ Feb 16 2006, 09:21 PM)
QUOTE (brant @ Feb 16 2006, 08:44 PM)
don't forget little ole me...
I'm looking for a 150mph speedo please

brant

Are you coming with us Brant?!?!

Oh shit....there goes the neighborhood sad.gif

Who's lap is he gonna ride on gayfight.gif

he's bringing alpha too
SLITS
QUOTE (Aaron Cox @ Feb 16 2006, 09:45 PM)
QUOTE (SLITS @ Feb 16 2006, 09:44 PM)
QUOTE (Gint @ Feb 16 2006, 09:21 PM)
QUOTE (brant @ Feb 16 2006, 08:44 PM)
don't forget little ole me...
I'm looking for a 150mph speedo please

brant

Are you coming with us Brant?!?!

Oh shit....there goes the neighborhood sad.gif

Who's lap is he gonna ride on gayfight.gif

he's bringing alpha too

Alpha? Is he the new CGBC member you've been boasting about? aaron.gif

I suppose this means the Reverender Jesse "Rump Rider" Jackson is accompanying the Colorado "Brokeback Mountain Contingent" too.
Gint
We can't compete with the SCGBC.

Don't ferget the heater parts SLITSY? I gotta keep Greg's tootsies warm.
SLITS
QUOTE (Gint @ Feb 16 2006, 09:55 PM)
We can't compete with the SCGBC.

Don't ferget the heater parts SLITSY? I gotta keep Greg's tootsies warm.

That line would be just to easy...........
Gint
QUOTE (SLITS @ Feb 16 2006, 09:58 PM)
QUOTE (Gint @ Feb 16 2006, 09:55 PM)
We can't compete with the SCGBC.

Don't ferget the heater parts SLITSY?  I gotta keep Greg's tootsies warm.

That line would be just to easy...........

It was a freebie... rolleyes.gif
SLITS
QUOTE (Gint @ Feb 16 2006, 10:00 PM)
QUOTE (SLITS @ Feb 16 2006, 09:58 PM)
QUOTE (Gint @ Feb 16 2006, 09:55 PM)
We can't compete with the SCGBC.

Don't ferget the heater parts SLITSY?  I gotta keep Greg's tootsies warm.

That line would be just to easy...........

It was a freebie... rolleyes.gif

Sir, Yes Sir....all heater "tootsie parts" have been located and acquired, except for the barrel nut...Sir




You'll need a two outlet (early) blower or spliter and the hose to connect to the pass side "j" tube to keep his tootsies warm unless you are going to rely upon the engine cooling impeller.


Aaron Cox
ron, your late on your membership dues
brant
I guess I'm the dork...

gint,
only coming with in spirit...
nobody riding anywhere on my lap thou....

brant
SLITS
QUOTE (Aaron Cox @ Feb 16 2006, 10:08 PM)
ron, your late on your membership dues

Purse your lips and..........
TonyAKAVW
I've got a couple blowers, I think one has the splitter and hoses. Should I bring them?



-Tony
Flat VW
QUOTE (TonyAKAVW @ Feb 16 2006, 11:17 PM)
I've got a couple blowers, I think one has the splitter and hoses.  Should I bring them?



-Tony

Yes, and bring Jes, too.


John wavey.gif

P.S. Or just forget that other crap, and bring Jes.
Gint
QUOTE (TonyAKAVW @ Feb 16 2006, 11:17 PM)
I've got a couple blowers, I think one has the splitter and hoses. Should I bring them?



-Tony

Please do. The blower motor is not a show stopper though. We'll be highway cruisin all the way so there'll be plenty of heat. But I'll need one eventually anyway, so yes, please do. Thanks.
Toast
QUOTE (TROJANMAN @ Feb 16 2006, 06:44 PM)
looking for a spare throttle cable too. wink.gif (just in case)

and a fuel filter chairfall.gif

rolleyes.gif
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2024 Invision Power Services, Inc.