any ideas?

I get those red intake boots real cheap. Less than $2 each from BAP Geon. You can find rebuild kits on ebay.

Turbo XS has all sizes of silicone hose...bet they would have something that would work!

http://www.turboxs.com/contact.htm

I say call them with dimensions..... do I need to dig through the microjunk yard and measure them for you?

going to bed,,,,

Nevermind, Thack's got you covered!

As for a rebuild kit, pretty much anyplace that sells Webers: Pierce Manifolds, Redline Carbs, etc., will have rebuild kits. You'll need to identify which flavor you have (DGV, DFV, DGAV, DGEV, DFAV, etc), which should be cast or stamped on the body somewhere.

They're made for Type 1, '71-'74, and Type 2 '71. The Cap'n

http://cgi.ebay.com/WEBER-DGV-DGAV-32-36-C...1QQcmdZViewItem

$11 rebuild kit. Did you need the carb itself? If you don't have a BAP Geon near you I can ship you some boots.

Looks like there in one in VA - cool - and thank for the ebay link - Jim

Bap Geon Import Auto Parts
7655 Granby St
Norfolk, VA 23505-2508 View Map
(757) 440-0004

I got mine at FLAPS, but they dont come with the FLOAT!

Float sold sepratly!!