Click to view attachmentHi...

I want to use these wheels....with the pictured flairs....but im not sure what spacers or ? I might need..


Click on the links to look at the flairs:

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...0777&rd=1,1

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...2488&rd=1,1

Help...

Thanks..

Steve

You need to know the offset. There are numbers next to the valve stem....

They look like post 89 wheels....the Porsche Gods started going with flat sided wheels that require 1-2 inch spacers to fit early cars. Of course some Boxster wheels fit w/o a spacer just to make it interesting....

AND... stock 15x7" fuchs are ET 23mm....

so if your wheel has an offset of 53... and you want it to sit the same as a fuch, you do some math. 53mm-23mm = 30mm spacer.

I would say 996 Turbo is the name of the wheel.. only comes in 18" and these widths..
7.5"
8"
8.5"
9"
10"
11"
12"

Hi again...

Anybody make the spacers that you speak of? This is the only place Ive found so far:

http://www.wheeldynamics.net/Accesories.html

This will be a V8 conversion street car only...Is there any fear of using 1-2" spacers on the street?

Thanks...

Steve