Help - Search - Members - Calendar
Full Version: Group Buy: Performance Rear Suspension Bushings
914World.com > The 914 Forums > Member Vendors
Pages: 1, 2
Eric_Shea
Hi Gang,

If I can get 25 people interested in the performance rear suspension bushings the price will be $19.95 for a complete set of 4.

These are the good ones. They are made of a harder delrin style polymer than the average replacement bushings and they're less than 1/2 the price with this buy.

These will need to be honed to fit your specific control arm rods. We've found the rods and control arms to vary wildely. This is a good thing. Each one will fit like a glove.

Zerks are recommended for this.

Let me know if you're interested. This is by far the most cost effective way to get excellent bushings on the rear of your teener.

List:

Greg Silva = 2 (sets)
Bill D. = 1
Joe = 1
Eric = 1
Bob = 2
Thom = 1
Evil1 = 1
Bob Burton - 2
rfuerst911sc - 1
Jim T - 1
Zach - 1
Mark D. - 1
Pete T. = 2
Al M. = 2
MZM = 2
Rotary Rob = 2
San Jose = 1
Paul B. = 1
Chris = 1
Richard = 1
David = 1
Bill G. = 1
Scott Pickering = 1
Scott K. = 1
David Wong = 1
Bob Ferg = 1
Teknon = 1
Daveyboy = 1
Charles = 1
Ted = 1
Dominic = 1
Mike S. = 1

39 sets marked sold. These are three weeks out from May 21st. Expected arrival date is June 11th. Expected delivery date should be before June 18th.
billd
I'm interested in a set.

----Bill
Joe Ricard
I'm down for a set.
as a matter of fact I found a bad poly rear this morning during post autocross inspection.
eric914
I'm in for a set.
BIGKAT_83
I'll take two sets of the rear bushings, can we also get them for the front?

Bob
dakotaewing
I am good for a set, and would like fronts as well...
Dr Evil
Nice price, I'm in for one set. Since numbers are needed, I cant resist wink.gif
burton73
Eric,

I would like 2 sets just in case.

Thanks,

Bob Burton
rfuerst911sc
I chimed in on the cross post but to be safe I'll say I want one set here also.
jimtab
One set would be lovely...
VaccaRabite
I'm in. 1 set.

Just let me know who and when to pay.

Zach
BMXerror
I'm in. 1 set. We're dying to know, are you working on fronts?
Mark D.
ptravnic
2 sets for me por favor.

-pt
Al Meredith
I'll take two sets
MZM
Eric, please record me for two sets, and the front as well if that happens. Now all I need is the car [aledgedly on its way!]

Mike McBride, member # very new, about 1x10 to the 6th.
Eric_Shea
Mike welcome.png

wink.gif
Rotary'14
I want in too!

Put me down for 2 sets.

-Rob
sj914
I'm in for a set and if the fronts are available I'min for those as well.
lotus_65
i'll buy.
i'd buy fronts too.
thanks.
paul b.
type11969
I'm in for a set, whats another 20 bucks?
Richard Casto
Put me down for one set.
dbu356
I'll take a set

Thanks

David
Grimstead
If I'm not too late, I'll take a set Eric.
bye1.gif
skline
Well at this price, put me in for a set too if I am not too late yellowsleep[1].gif
dyw914
I'll take a set if still available.

David Wong
v82go
I too would like a set if not too late.

thanks Bob
Teknon
Eric, I'll also get a set if still available.
daveyboybadion
Hi Eric, I'll take a set too...daveyboy
charlesmac
One set please, thanks....
913B
Hi Eric, I am in for a set. Please let me know how much and your paypal address. I

Thanks
Ted
Dominic
Put me down for one set if they are still available.

Dominic
MikeSpraggi
Eric,

I would also like a set for my '70. Please let me know about the details.

Thanks
rfuerst911sc
What's the status of this group buy?
jeeperjohn56
Hey Eric! can we still get in for the group buy for rear bushings? I'll take one set, are you doing fronts also? Thanks John pray.gif
jkb944t
QUOTE(jeeperjohn56 @ Jun 5 2007, 03:26 AM) *

Hey Eric! can we still get in for the group buy for rear bushings? I'll take one set, are you doing fronts also? Thanks John pray.gif


I am also interested in getting a set if it isn't too late.

Jeff B
porsche914gt
I am also interested in getting a set if it isn't too late. Just saw this thread, and mine are squeaking. If it's to late, I'll go for the Elephants.
Danieltt1956
I would like a set if they're still available.
scotty b
2 please thumb3d.gif
Eric_Shea
Bad News - Bushings came in today (right on schedule). They are the standard (softer) .90 compound... sad.gif

Good News - We're ordering now 200 of the .75 (harder) compound. This should cover all the requests. wink.gif

Bad News - It will be another 6 weeks for the custom order in the proper harder compound. sad.gif whistle[1].gif yawn.gif
Teknon
finger.gif
Dr Evil
Sallgud
E-Man
Please include me in this group buy for one set if I'm not too late. I'd love to get a set for the front too if that comes about. Thanks!
-Mike Dugan
John
Is this deal still available?
Grimstead
Hey Eric,
Will you let us know when you want the cash for these?

I'm in no rush but want to make sure you have our cash when it comes time to pay the piper.

Thanks again buddy,
Bill
beer.gif
John
Any update on these yet?

Just curious, and I may want more than one set.
Eric_Shea
BELIEVE IT OR NOT...

These are on the way. They are shipping from the manufacturer today.

Very sorry to all for the delay, my middle man on this totally dropped the ball. The original manufacturer is a bit quirky to deal with as well so I was reticent about posting this until today; the day I actually got word that they are shipping.

I'll be sending individual PM's to those who expressed interest. If you want to bail or if you found another alternative, I TOTALLY understand. No worries.

I'll also post a how to article on what I've found to be the best way to install these with zerks.

Many thanks for your patience...

Onward.
blitZ
I'll take a set if you have any extra.
euro911
stromberg.gif I missed this too Eric.

Let me know if there are any left over after all the dust has settled ...

I'd be interested in a set for the front as well, should that ever come about
G e o r g e
agree.gif

with Euro (Trash) 911, J|K Mark

I would take a set as well if you have any left over beerchug.gif
Richard Casto
payment sent!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2024 Invision Power Services, Inc.