I'm thinking not this saturday but the following one (23rd) of having a workfest. Beer and food would be supplied, and you're welcome to bring some. Basically, here's what I need to do, and I'd like to see how many people could show, I know the WCR is coming up.

Basically here's it:

- Drop engine and trans
- Drain Transmission, replace with Swepco and install new plugs.
- Pull pushrods and install new seals.
- Oil change, valve adjust.
- Install delrin solid engine mounts.
- Install 4 new 911 engine sport mounts, 2 for trans 2 for engine bar.
- Reinstall engine and trans!

That'd do it. It can be done in a day with some help, rather than doing it at the shop over 2 days and fighting for a lift.

Who can come and help?

911 sport mounts do NOT work on a sideshifter engine bar....

party pooper

Why is that? Height? Bolt hole diameter? I could get a drill and shims...

I'm going to the WCR this weekend but have the following weekend free.

I'm game for whatever...

Who can make an appearance for June 30th?

Unless sumpin comes up that makes me large bucks.. I'm in...
Lets finish Aarons car the same day...!!!!!

Clayton

my motor is 3 hrs frombeing in the car.....

pick me up some manton pushrods and we are good.

craig is coming over wed or thurs night after work

Aaron tow your car to my parking lot. Plenty of work space at my place, we could do both cars that day Also need to know why those mounts wont work before i buy...

Works for me. Albeit a little later in the day. Last day of T-ball for my kids.

Because the sideshifter uses solid outer mounts and rubber inners.

Side shifter on top, tail shifter on the bottom.

no, because only a tailshifter uses outer rubber mounts ...
Andy

Yeah, I know, I've got the PET manual and latest retail prices too. I'm replacing with SOLID inner mounts. Is there any reason why the 911 engine mounts will not fit or something on the outside?

pretty sure that if the whole engine bar is going to be moving around it will interfere with the shiftrod going thru the hole in the engine bar.

its only money.... give it a go LOL

Can't do the 30th as I will be in Istanbul...

the reason why the sideshifter bar is mounted solid is so your shift-rod doesn't get knocked around while driving ...

Andy

currently have that problem with a broken engine mount... sucks. I wish there were a 'semi solid' option for engine mounts. That's what I'm trying to achieve...

Ah well. Can't put this off too far, let's see who can commit to what date.