Help - Search - Members - Calendar
Full Version: 205-65-15 on stock wheels
914World.com > The 914 Forums > 914World Garage
Garland
I have spent time on this and wonder what you guys think. I know a 205 60 wil work, looking for a little more.
solex
QUOTE(Garland @ Oct 29 2007, 11:18 AM) *

I have spent time on this and wonder what you guys think. I know a 205 60 wil work, looking for a little more.



Probably not, I have 205/55 on mine and then barely fit in the rear
DanT
205x50s will fit, 205x60s will fit.....so why would a slightly taller tire not fit?

205x65s have a slighly taller side wall. If your car is not extremely lowered then I don't see why they would not fit.

I am not completely sure of the fitment since I have never tried them, but it seems to me if your car is near stock ride height they should work.
woobn8r
agree.gif
a 205/65R15 is only the slightest height increase over the factory OE 185/70R15 fittment....
ttwitc9516
I've run 215/65/15 on stock wheels on mine since the late 80's with no problems. Had to finesse the rear fender lip a little but nothing serious. Running 205/65's on the front right now with no problems
sean_v8_914
why so tall?
ttwitc9516
Previously, an abundant supply, but I am dropping back to a 215/60 in the near future. If I recall right the overall height was nearly the same as that of the 165SR I took off at the time(1987). Amazing what 40 or 50 mm of tires and 10 degrees of initial timing make in these little cars. I've always thought Porsche would have sold a lot more of these with just these two changes.
Garland
QUOTE(ttwitc9516 @ Oct 29 2007, 01:16 PM) *

I've run 215/65/15 on stock wheels on mine since the late 80's with no problems. Had to finesse the rear fender lip a little but nothing serious. Running 205/65's on the front right now with no problems


Do you have a picture you could post? I would like to see the 205-65 on the frt and the 215-60 on the rear. Or and location on the car , just like to see.
RoninEclipse2G
205/65/15's here. it's what was on the car when we got it, no rubbing in the rear, at full lock the fronts rub very slightly on the inner fenderwell if I hit a bump (like pulling into my parking area) I can see a small spot up inside the fender worn through the undercoating
SLITS
Ran them on a '74 with Fuchs .... no problem. Rolling diameter is the same as the stock tire.
Garland
I was concerned about the height and the tire rubbing the front of the front lower fender as you turn. I had 185 70 15's, years ago and it was the close, everywhere else was OK.
I am going with 205/65/15, They will fit the rims a little better then the 215's I will add pictures, when that happens.


Specification Sidewall Radius Diameter Circumference Revs/Mile


195/60-15 4.6in 12.1in 24.2in 76.1in 833
215/55-15 4.7in 12.2in 24.3in 76.4in 830
185/65-15 4.7in 12.2in 24.5in 76.9in 824
205/60-15 4.8in 12.3in 24.7in 77.6in 817
195/65-15 5.0in 12.5in 25.0in 78.5in 807
185/70-15 5.1in 12.6in 25.2in 79.2in 800
215/60-15 5.1in 12.6in 25.2in 79.0in 802
205/65-15 5.2in 12.7in 25.5in 80.1in 791
215/65-15 5.5in 13.0in 26.0in 81.7in 776

Goodyear Eagle ResponsEdge

Tire Rack Web Page

This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2024 Invision Power Services, Inc.