Full Version: Oil coolers for a 6
Just curious. I have a 914-6 engine in my car and I may be getting a 911 2.4l... at least that is my goal. I am wondering. Do I need to keep the cooler off the 2.0l or will the cooler off the 2.4l work and bolt up the same?
You need to use a 914/6 oil cooler, or one appropriately modified. The oil line will hit the body if you use an unmodified 911 cooler. The Cap'n
Engine mounted or front cooler or both?
QUOTE(Cap'n Krusty @ Jan 29 2008, 12:35 PM) 
You need to use a 914/6 oil cooler, or one appropriately modified. The oil line will hit the body if you use an unmodified 911 cooler. The Cap'n
So you can modify the 911 one to fit right? How hard is that to do?
QUOTE(sww914 @ Jan 29 2008, 12:36 PM)
Engine mounted or front cooler or both?
engine
QUOTE(Phoenix 914-6GT @ Jan 29 2008, 12:40 PM)
So you can modify the 911 one to fit right? How hard is that to do?
cut & weld ...
Andy
Yes.
No.
No.
3 nuts. Swap.
QUOTE(SirAndy @ Jan 29 2008, 12:45 PM)
QUOTE(Phoenix 914-6GT @ Jan 29 2008, 12:40 PM)
So you can modify the 911 one to fit right? How hard is that to do?
cut & weld ...
Andy
Well, maybe I will just keep the cooler from my 6 then.
Yup I would....keep the other as a spare and then have a 90 deg welded on it for a backup
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.