I'm in the process of redoing the oil cooling on my 914 3.2 conversion. I'd like to remove the on-engine cooler and replace it with a larger after-market unit. I've seen a plate which bolts in this location and provides two AN-16 (or similar) fittings to run hoses to the new cooler, but I cannot for the life of me find it now. Smart racing comes the closest with a kit to relocate the oil filter to this area, I could then run a more standard oil filter relocation kit from there but the correct plate would be a much nicer solution.

I really need to get this peice in a hurry and will be extremely grateful for any help. Thank you!

Try pages 30-32 in this catalog:

http://www.smartracingproducts.com/pdfcat/srpcatalog2008.pdf

Thank you for the help. That is as close as I've gotten in probably 5 solid hours of web searching. What I need is like item 1 or 2 on page 32 there but instead of a filter mount I want a couple threaded fittings. I know I've seen it, recently, but can't find it now.

Try JB Racing. They make many products for the usual suspects.

http://www.jbracing.com/enginecomp.php

As a note you need the 965 oil cooler block off for the 3.2 cooler relocation.

Thank you. JB doesn't have it online, but I'll call Monday. The search string will get some use today! I don't think I've tried the 964 element...