i would like a local (PNW) pair of trailing arms in good shape (cores) a little surface rust ok as they are to be sand blasted

I have several sets if you can't find any closer.

Do you need early or late style? 70-72 have different rear brake line holder.

didn't know there was a difference...i need late model arms
i have a 75

I have a pair off a 74. No hubs so they are not that heavy anymore. $25 plus shipping if you want them. I'm in Portage Indiana, I know not the PNW, but just thought I would offer.

Early arms were all 914-6 arms and had a small tab welded on to hold the heater cables (I think). Can't remember from my six which it was but this was a simple screw through a strap of rubberized cloth.

You will find different part numbers for 914-6 arms and this is why but... again, all early cars had these arms.

Here's a bunch in the shop:

Click to view attachment

Click to view attachment

Click to view attachment

Steve When are you gonna be back down this way, I have
several to choose from. I sorry I missed you for the flare gig.

R.

I have some as well for you too look at. I need to send at least one pair to Eric but I have a few around that I need to have out of my garage soon.

hi, I have several trailing arms you could pick from! I live in bellingham.
Take care
Bill

i am busy mudding the flares....i hope to get the stuff straight one of these times...
untill then it is putty on ...sand off and lets do it again...each time it gets a little better
i will be down in spring as soon as the rain stops