Pulled 2.5 years ago from a running factory 914/6. Tank only, non restored, used condition.

I'll give ya $50 for it.

I would think for the difficulty of getting these it should still bring a good $.

Fine! $55, but that's it!

Honestly, It should be north of $400, but not sure how far north.

Keep in mind, there is an effort afoot to make tanks which may undermine it's value at some point in the future.

If tanks can be made cheaply, then the value would only be to a real 6er.

What's the paypal for that $55???

You can get a brand new one for $875. On Ebay but you will need all the extra parts . I had to get all of those when I restored my oil tank from #41. No rust on my tank but the foam was less than nice and the rubber parts hade gotten hard. So a used one will clean up very nice if it is not rusted.

Bob

Okay, so that being said maybe 6-700 would be fair. 600 being gracious.

I have had two of them recently that looked great. Both had holes in them that you could not see with the naked eye. Repairs totaled $135. each.
CCLINOILMEDOWN

I will give you 500 for it.

Here is a brand new factory tank for 875:
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...3&viewitem=

or an aftermarket from Patrick Motorsports for 795:
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=170278530311

I was serious about the 500 bucks btw... PM me if you want to do the deal.