I searched but couldn't find it. I've got my 1/4 inch torque wrench ready.

snug enough so as not to drip but not too much as to strip out the case....

I don't recall the exact value, but it was *really* low ...

Just enough to crush those new copper washer you bought together with the new gasket and new o-ring.
Andy

4 ft-lbs into aluminum, or 48 in-lbs. I use this link all the time for torques. It maps to most all porsche manual specs, where they list them.

http://dodgeram.org/tech/specs/bolts/M_bolts.html

Jim