Prices below do not include shipping. Can do paypal, or whatever.

2 pairs of heater flapper boxes, Rusty, but will work: $10 each ($20 for a L/R pair) Warm air guides some rust, lots of dirt: $10 each (pictured on top)
Click to view attachment

Front signal lenses. Includes mounting screws. Nowhere near perfect. $15 for the pair.
Click to view attachment

Wiring harness. No details known, but connectors look to be all there. $25.
Click to view attachment

Also have rear trunk latch (not pictured) Very worn, but will work. $5

Window cranks (each is a different style and one has some marks in the plastic) Free, just pay shipping.
Click to view attachment

The rest of the stuff pictured below is also free, just pay shipping. Most of it is from a '75 2.0 and all of it needs a good cleaning Pieces are identified from left to right:
L/R pieces that the heater hose in the engine bay connects to before going to the exchangers (through the engine tin).
The middle two 'clamps' are missing the rubber gaskets
Stainless steel j-tube that fits '74 or earlier cars, but has connector bolt rusted into it.
'75 heat exchanger elbows (L/R).
Click to view attachment

hi,

need a pair of flapper valves, the piping to make it work (as missing all of it) so will take what you have and one window crank.

Please revert with a total price including shipping to A1A 4Y1 Canada.

What year is your car? Depending on what year car/heat exchanger set up you have, the few bits of piping I have may not work. The flapper boxes will work for any year though. I'll PM you the total later tonight.

Thanks,

Robert