Printable Version of Topic

Posted by: Harpo May 16 2014, 03:49 PM

Has anyone modified one of these to fit a 914

http://www.rennline.com/RS-Style-Door-Pulls/productinfo/DH25/

Thanks

David

Posted by: Alphaogre May 16 2014, 04:30 PM

I would like to know too, I was wanting something like this for my 914 too...

Posted by: lonewolfe May 16 2014, 05:00 PM

Here are two complete door panels options to consider.

http://www.ebay.com/itm/Porsche-914-916-GT-Style-Door-Panels-Black-Vinyl-/230744154136?pt=Motors_Car_Truck_Parts_Accessories&hash=item35b96c6018&vxp=mtr



http://www.ebay.com/itm/Porsche-914-916-RS-America-Door-Panels-Black-Vinyl-/230616639518?pt=Motors_Car_Truck_Parts_Accessories&hash=item35b1d2a81e&vxp=mtr

Posted by: Harpo May 16 2014, 06:03 PM

Here is a better example than a Mini

http://porschepartssale.com/index.php?route=product/product&path=130_182&product_id=168

Posted by: mdelwiche May 16 2014, 06:17 PM

I am looking ordering the RS door panels for my rebuild. I contacted him to see if he could use a period correct basketweave instead of a plain vinyl.

Posted by: larryM May 16 2014, 08:04 PM

why?

the GT door pull looked nothing like that

per AA
Interior Door Handle Pull Straps 90153106700 - factory original door pull straps. These were installed on all of the factory 914-6 GT and 911 rsr models in place of the heavier door box armrest assemblies.

914-6-GT door pull

Posted by: jim_hoyland May 16 2014, 08:44 PM

Looks like the door pulls kits sold by AP. Bought a set several years ago. They still sell them

Posted by: boxstr May 17 2014, 08:03 AM

A few years back I went to rei coop and purchased some red nylon strap, just like you see in the Rennlist pics.i cut it to size so I had a loop. Then I secured it through the door panel through the hole left after removing the drivers door pocket. I used one of the passenger side door pull bezels to finish its off. It was a pull only, it did not unlatch the door. Looked great and it was not that spendy.
Craig at CAMP

Posted by: Mike Bellis May 17 2014, 09:54 AM

I don't think this kit will work but I like the look. If you read the installation instructions, it needs the guts of a 911 door latch to work.