02-22-2006

I started laying out how I want the Motronic to mount in the interior and after much contemplation, I decided to locate the items under the passenger seat. On the race car, I did something similar (OK, EXACTLY). Last winter my dad decided to shim the passenger seat up 3/4" in the track car to alow the pass. seat to clear the altitude correction box, so I will do that here as well.

Here is the Motronic ECU, Altitude Corrector, and DME Relay loosely mounted to the floor. I used some clamps to hold the harness in place and to prevent the seat rails from squishing it.




Attached thumbnail(s)