|
|
|
|
|
|
Safety First!!! Don't Get Hurt!!! Putting in a 1968 327 SBC bored 060 over. Should be putting out around 330hp which should be adequate for the 901. Hedman 69230 headers, Holley 670 street avenger. Roller rockers, blah blah...    Adapter plate and flywheel on-  Kevlar clutch-  Clutch complete  Doc Evil Trans on   Camshaft Break In-   Electric Water Pump, stock fuel pump.  Coated headers with Eastwood Hi-temp coating.  
Rear control arms sand blasted, inspected and POR'ed. New bearings installed and new bushings. Thanks to Eric Shea for the beautiful control arm shafts !!!    New tub arrives-  ScottyB painted up some flares for me  Welded on some braces  Thanks Eric!  The Bushwacker look....   Someone ahead of me...         Nice copy? [attachmentid=12617]  Attached thumbnail(s)     | Need a hobby!
 nuthin here
 5 lug suspension
Changing over from the stock suspension to a 5 lug. Front off a 1974 911. Lots of new parts! Bilstein inserts rebuilt by Stewart Development. Bernie Stewart rebuilds shocks for the Nascar and road race communities.
 2.0 Compression Ratio
[attachmentid=12395]
    Attached thumbnail(s)  Attached image(s)  |
Jul 22 2012, 02:26 PM