![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
Steve |
![]()
Post
#17261
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,890 Joined: 14-June 03 From: Laguna Niguel, CA Member No.: 822 Region Association: Southern California ![]() ![]() |
quote name='technicalninja' date='Dec 27 2024, 08:08 AM' post='3183438']
[quote name='Cairo94507' post='3183437' date='Dec 27 2024, 10:04 AM'] @Steve - I love that steering wheel!!!!! (IMG:style_emoticons/default/beerchug.gif) (IMG:style_emoticons/default/smilie_pokal.gif) [/quote] I love the entire car! So nice! I prefer the 930S wheel as well. So much I bought two... [/quote] Thanks!! I have a steering wheel fetish. I ordered the 3 bolt to Momo adapter, so I can switch the wheels without changing the Momo 914 hub. https://www.design911.co.uk/p/atiwe-ati-ste...m-hub-boss-kit/ |
Jett |
![]()
Post
#17262
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,684 Joined: 27-July 14 From: Seattle Member No.: 17,686 Region Association: Pacific Northwest ![]() ![]() |
Got a new car cover for the 75 Palma green car… looks great
|
930cabman |
![]()
Post
#17263
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,169 Joined: 12-November 20 From: Buffalo Member No.: 24,877 Region Association: North East States ![]() ![]() |
To get the red contraption to work I had to add another contraption between that and the blue contraption to get enough CFM. It worked (IMG:style_emoticons/default/smile.gif) Great news, what is the contraption in the middle? |
mmichalik |
![]()
Post
#17264
|
MikeM ![]() ![]() ![]() Group: Members Posts: 771 Joined: 27-January 16 From: Valley Center, CA Member No.: 19,600 Region Association: Southern California ![]() ![]() |
I adjusted the brake switch so that the brakes weren't always on. Just needed a turn or two so, nothing major but, that's a hard area to work on / in/
|
Shivers |
![]()
Post
#17265
|
Senior Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,076 Joined: 19-October 20 From: La Quinta, CA Member No.: 24,781 Region Association: Southern California ![]() |
To get the red contraption to work I had to add another contraption between that and the blue contraption to get enough CFM. It worked (IMG:style_emoticons/default/smile.gif) Great news, what is the contraption in the middle? It is one of these: https://www.harborfreight.com/110-lb-pressu...ByABEgKiCvD_BwE |
930cabman |
![]()
Post
#17266
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,169 Joined: 12-November 20 From: Buffalo Member No.: 24,877 Region Association: North East States ![]() ![]() |
To get the red contraption to work I had to add another contraption between that and the blue contraption to get enough CFM. It worked (IMG:style_emoticons/default/smile.gif) Great news, what is the contraption in the middle? It is one of these: https://www.harborfreight.com/110-lb-pressu...ByABEgKiCvD_BwE The middle contraption is basically a holding tank (reserve). Is the middle contraption pushing abrasive into the red contraption? The blue contraption will only put out so much. Y/N? so long as you get the results |
Shivers |
![]()
Post
#17267
|
Senior Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,076 Joined: 19-October 20 From: La Quinta, CA Member No.: 24,781 Region Association: Southern California ![]() |
To get the red contraption to work I had to add another contraption between that and the blue contraption to get enough CFM. It worked (IMG:style_emoticons/default/smile.gif) Great news, what is the contraption in the middle? It is one of these: https://www.harborfreight.com/110-lb-pressu...ByABEgKiCvD_BwE The middle contraption is basically a holding tank (reserve). Is the middle contraption pushing abrasive into the red contraption? The blue contraption will only put out so much. Y/N? so long as you get the results It is a holding tank and the abrasive goes in there. The hose runs into the cabinet. I have had to clean the dust recovery system and move the abrasive from the red hopper back into the middle contraption at the same time. The blue contraption is 165 psi but only 5.3 cfm. The thing in the middle is 10 CFM at 90 psi. So it refills quick.Runs all my tools but would not run the cabinet. So since I do not blast non stop, I've only had to wait a minute for it to catch up a couple times. For me it worked out real well, I joined their club and got it for 119.00 |
930cabman |
![]()
Post
#17268
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,169 Joined: 12-November 20 From: Buffalo Member No.: 24,877 Region Association: North East States ![]() ![]() |
To get the red contraption to work I had to add another contraption between that and the blue contraption to get enough CFM. It worked (IMG:style_emoticons/default/smile.gif) Great news, what is the contraption in the middle? It is one of these: https://www.harborfreight.com/110-lb-pressu...ByABEgKiCvD_BwE The middle contraption is basically a holding tank (reserve). Is the middle contraption pushing abrasive into the red contraption? The blue contraption will only put out so much. Y/N? so long as you get the results It is a holding tank and the abrasive goes in there. The hose runs into the cabinet. I have had to clean the dust recovery system and move the abrasive from the red hopper back into the middle contraption at the same time. The blue contraption is 165 psi but only 5.3 cfm. The thing in the middle is 10 CFM at 90 psi. So it refills quick.Runs all my tools but would not run the cabinet. So since I do not blast non stop, I've only had to wait a minute for it to catch up a couple times. For me it worked out real well, I joined their club and got it for 119.00 what I figured, I have the same contraptions, just need to piggy back them together, Great idea, thanks |
burton73 |
![]()
Post
#17269
|
Senior member, and old dude ![]() ![]() ![]() ![]() Group: Members Posts: 3,849 Joined: 2-January 07 From: Los Angeles Member No.: 7,414 Region Association: Southern California ![]() ![]() |
@Shivers
This was a very good idea. Please tell me that you are wearing very good dust protection. I recently lost a younger friend from lung failure from construction dusts over the years. Silica is the devel. Best Bob B |
FlacaProductions |
![]()
Post
#17270
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,966 Joined: 24-November 17 From: LA Member No.: 21,628 Region Association: Southern California ![]() ![]() |
Just put a nice 20 miles on great, curvy Indiana backroads. Gotta love a 59 degree December 28th!
|
Shivers |
![]()
Post
#17271
|
Senior Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,076 Joined: 19-October 20 From: La Quinta, CA Member No.: 24,781 Region Association: Southern California ![]() |
@Shivers This was a very good idea. Please tell me that you are wearing very good dust protection. I recently lost a younger friend from lung failure from construction dusts over the years. Silica is the devel. Best Bob B Yes I have a respirator and a dust recovery system on the booth. Thanks Bob |
morehills |
![]()
Post
#17272
|
Member ![]() ![]() Group: Members Posts: 110 Joined: 2-March 23 From: Great Barrington, MA Member No.: 27,202 Region Association: North East States ![]() ![]() |
First time I've put one on the floor. (IMG:style_emoticons/default/biggrin.gif)
Attached image(s) ![]() |
Cairo94507 |
![]()
Post
#17273
|
Michael ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 10,379 Joined: 1-November 08 From: Auburn, CA Member No.: 9,712 Region Association: Northern California ![]() ![]() |
Congratulations! Nicely done. (IMG:style_emoticons/default/beerchug.gif)
|
FlacaProductions |
![]()
Post
#17274
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,966 Joined: 24-November 17 From: LA Member No.: 21,628 Region Association: Southern California ![]() ![]() |
Replaced the stock injectors for 3 and 4 with new FJ67's.
I had done the other two a while back as they were leaking (!) so it's good to get things "evened out" with all 4 running on the same injectors. Looking forward to sending the OEM's off to Mr. Injector to see how they were.... |
930cabman |
![]()
Post
#17275
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,169 Joined: 12-November 20 From: Buffalo Member No.: 24,877 Region Association: North East States ![]() ![]() |
what's on the docket for this PP? |
East coaster |
![]()
Post
#17276
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,859 Joined: 28-March 03 From: Millville, NJ Member No.: 487 Region Association: None ![]() ![]() |
Did something most 914 teeners don’t have to worry about. I discovered a very slight coolant leak at some of my hose connections (minor drips). It seems the cold weather (and time) loosened my hose clamps a wee bit. A couple twists of a nut driver and all is good again.
|
Shivers |
![]()
Post
#17277
|
Senior Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,076 Joined: 19-October 20 From: La Quinta, CA Member No.: 24,781 Region Association: Southern California ![]() |
|
Shivers |
![]()
Post
#17278
|
Senior Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,076 Joined: 19-October 20 From: La Quinta, CA Member No.: 24,781 Region Association: Southern California ![]() |
|
Stef914 |
![]()
Post
#17279
|
human ![]() ![]() Group: Members Posts: 96 Joined: 21-July 21 From: Los Angeles Member No.: 25,745 Region Association: Southern California ![]() |
|
Shivers |
![]()
Post
#17280
|
Senior Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,076 Joined: 19-October 20 From: La Quinta, CA Member No.: 24,781 Region Association: Southern California ![]() |
I'm glad I did it this way, looks like it will keep a more round shape. I was going fiberglass but I was offered such a good deal on steel I couldn't say no. Just by cutting I was able to get everything to line up. Next I add sheetmetal (IMG:style_emoticons/default/smile.gif)
![]() ![]() ![]() |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 10th July 2025 - 05:51 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |