 Six Conversion Question, Ignition Setup |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| Ericv1 |
 Feb 8 2010, 12:47 PM
Post
#1
|
|
Member  Group: Members Posts: 259 Joined: 30-December 07 From: Cincinnati, Ohio Member No.: 8,518 Region Association: Upper MidWest  |
I have a 911 1970T as a donor car that the engine is coming from. Currentley, it's setup with a CDI (Captive Discharge Ignition). Will I need to move the Bosche CDI box over from the 911 inorder to get the engine running in the teener? Thanks in advance. |
   |
 
|
| dr914@autoatlanta.com |
Feb 8 2010, 12:58 PM
Post
#2
|
|
914 Guru Group: Members Posts: 8,239 Joined: 3-January 07 From: atlanta georgia Member No.: 7,418 Region Association: None |
QUOTE(Ericv1 @ Feb 8 2010, 11:47 AM)  I have a 911 1970T as a donor car that the engine is coming from. Currentley, it's setup with a CDI (Captive Discharge Ignition). Will I need to move the Bosche CDI box over from the 911 inorder to get the engine running in the teener? Thanks in advance. yes |
|
|
|
| Ericv1 |
Feb 8 2010, 01:27 PM
Post
#3
|
|
Member Group: Members Posts: 259 Joined: 30-December 07 From: Cincinnati, Ohio Member No.: 8,518 Region Association: Upper MidWest |
QUOTE(dr914@autoatlanta.com @ Feb 8 2010, 01:58 PM) QUOTE(Ericv1 @ Feb 8 2010, 11:47 AM) I have a 911 1970T as a donor car that the engine is coming from. Currentley, it's setup with a CDI (Captive Discharge Ignition). Will I need to move the Bosche CDI box over from the 911 inorder to get the engine running in the teener? Thanks in advance. yes Thanks George. |
|
|
|
| dr914@autoatlanta.com |
Feb 8 2010, 01:55 PM
Post
#4
|
|
914 Guru Group: Members Posts: 8,239 Joined: 3-January 07 From: atlanta georgia Member No.: 7,418 Region Association: None |
And of course it mounts on a plate attached to the front of the battery tray.
QUOTE(Ericv1 @ Feb 8 2010, 12:27 PM) QUOTE(dr914@autoatlanta.com @ Feb 8 2010, 01:58 PM) QUOTE(Ericv1 @ Feb 8 2010, 11:47 AM) I have a 911 1970T as a donor car that the engine is coming from. Currentley, it's setup with a CDI (Captive Discharge Ignition). Will I need to move the Bosche CDI box over from the 911 inorder to get the engine running in the teener? Thanks in advance. yes Thanks George. |
|
|
|
| ClayPerrine |
Feb 8 2010, 02:20 PM
Post
#5
|
|
Life's been good to me so far..... Group: Admin Posts: 16,545 Joined: 11-September 03 From: Hurst, TX. Member No.: 1,143 Region Association: NineFourteenerVille 
|
You will have to rearrange the wiring, as the CD box is not in the same relative location as it is on a 911. The engine harness is different too. I can provide a wiring diagram if you like, as I have done this on my car. I have the diagram on my computer at home, but not here.
I would suggest that you purchase a spare CD box and keep it with you. They are notorious about blowing the power transistor and leaving you stranded on the side of the road. I mounted mine on the back side of the factory bracket, and if the primary fails, I can just hook the wiring to the spare and continue down the road. |
|
|
|
| 914Sixer |
Feb 9 2010, 03:21 PM
Post
#6
|
|
914 Guru Group: Members Posts: 9,493 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region
|
AA now has repro mounting brackets available now for a clean installation.
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2026 - 11:56 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.