 aeroquip socketless, dream come true |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| machina |
 Apr 1 2004, 03:16 PM
Post
#1
|
|
Advanced Member  Group: Benefactors Posts: 2,030 Joined: 21-June 03 From: Miami Beach, FL Member No.: 848   |
I have these things on my fuel system, didn't realize that you just cut the hose, oil, and insert the end.
Are these things safe? Seems too easy. I was planning on using these for my -12 oil lines. dr |
   |
 
|
| iamchappy |
Apr 1 2004, 03:33 PM
Post
#2
|
|
It all happens so fast! Group: Members Posts: 4,893 Joined: 5-November 03 From: minnetonka, mn Member No.: 1,315 Region Association: Upper MidWest  |
They are great, I am using them on my 3.0 CIS engine to and from the gas tank, easy to work with and no pin pricked fingers the SS lines provide, I use a combination of both SS and socketless on my car.
|
|
|
|
| machina |
Apr 1 2004, 03:46 PM
Post
#3
|
|
Advanced Member Group: Benefactors Posts: 2,030 Joined: 21-June 03 From: Miami Beach, FL Member No.: 848 |
Sounds great.
I am using the SS braid everywhere else, but the -12 lines that run from front to back are in the longitudinal with a battery cable. I don't want that ss rubbing on the battery cable, so the socketless hose should work out. Glad to hear your having success. dr |
|
|
|
| seanery |
Apr 1 2004, 03:52 PM
Post
#4
|
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,857 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
I've been reading up on these since this post. How do they stay on?
(IMG:http://www.bakerprecision.com/images/assinstr1.jpg) |
|
|
|
| machina |
Apr 1 2004, 03:56 PM
Post
#5
|
|
Advanced Member Group: Benefactors Posts: 2,030 Joined: 21-June 03 From: Miami Beach, FL Member No.: 848 |
You have to use the socketless ends with only the correct hose. The long barbs and the precise fit holds it all together, no clamps or hacksaws.
I'll be re-routing these fuel lines soon but this is what they look like. dr Attached image(s) 
|
|
|
|
| J P Stein |
Apr 1 2004, 03:59 PM
Post
#6
|
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
I dunno bout the socketless stuff.
Buy some and pressure test them up to 200 psi (or so) while applying heat to em'......for a couple hours. |
|
|
|
| machina |
Apr 1 2004, 04:08 PM
Post
#7
|
|
Advanced Member Group: Benefactors Posts: 2,030 Joined: 21-June 03 From: Miami Beach, FL Member No.: 848 |
Aeroquip already did that.
Assembly rated at 300deg continuous at 250 psi. The AQP has the same temp rating but a much higher pressure margin, 500 => 1000 psi. Jake said he has seen 300psi on very cold startup but I think the socketless is probably OK for a racecar, maybe not for a race airplane. dr |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st July 2025 - 01:54 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.