My motor is headed back to Series9, Its going to kick its smoking habit |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
My motor is headed back to Series9, Its going to kick its smoking habit |
MoveQik |
Jun 23 2011, 05:07 PM
Post
#1
|
What size wheels can I fit? Group: Members Posts: 4,645 Joined: 5-April 05 From: Scottsdale, AZ Member No.: 3,881 Region Association: Southwest Region |
I have this on Narp but I know most of you don't check in there too often. I thought I would put it here as well so all can see what Joe is up to.
Buying a used motor is always a roll of the dice. Mine has ran strong since Joe put it in but the smoking issue(valve guides seem to be the most common diagnosis) has become worse over time and the oil leaks are no longer small. (IMG:style_emoticons/default/mad.gif) So we struck a deal that has me pulling the motor and sending it to Joe to rebuild. Then he is coming out to help me put it back in(read as, he is letting me slow him down). There are added costs in doing this obviously but Joe made it more than fair and it worked out to be cheaper than having any of our local shops do the work and hand me back a freshened up motor. Plus, I get some more much needed hands on experience. I got the motor out yesterday. I will be pulling off parts that I want to pretty up while Joe has the motor. I am also going to take this time to clean up and respray the engine bay. The before photo, fresh out of the car: Attached thumbnail(s) |
URY914 |
Jun 23 2011, 07:01 PM
Post
#2
|
I built the lightest 914 in the history of mankind. Group: Members Posts: 120,983 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None |
Hey is that a jackstand in the corner? (IMG:style_emoticons/default/confused24.gif)
I've never seen one w/o a 914 on it. (IMG:style_emoticons/default/lol-2.gif) |
Series9 |
Jun 23 2011, 07:14 PM
Post
#3
|
Lesbians taste like chicken. Group: Members Posts: 5,444 Joined: 22-August 04 From: DeLand, FL Member No.: 2,602 Region Association: South East States |
So what are we doing?
3.4? Individual throttle bodies? Motec? Huge cams? It's time to get rid of the distributor and at least go with the Electromotive crank-fire arrangement...... (IMG:style_emoticons/default/stirthepot.gif) |
MoveQik |
Jun 23 2011, 07:20 PM
Post
#4
|
What size wheels can I fit? Group: Members Posts: 4,645 Joined: 5-April 05 From: Scottsdale, AZ Member No.: 3,881 Region Association: Southwest Region |
So what are we doing? 3.4? Individual throttle bodies? Motec? Huge cams? It's time to get rid of the distributor and at least go with the Electromotive crank-fire arrangement...... (IMG:style_emoticons/default/stirthepot.gif) Hang on, let me put my wife on the phone for this one. :noFuchingWaySmilie: |
Series9 |
Jun 23 2011, 07:35 PM
Post
#5
|
Lesbians taste like chicken. Group: Members Posts: 5,444 Joined: 22-August 04 From: DeLand, FL Member No.: 2,602 Region Association: South East States |
Hang on, let me put my wife on the phone for this one. :noFuchingWaySmilie: This reminds me of a very old Sam Kinison joke. He's on the phone with his buddy, who is trying to talk him into going out with them and bringing his penis. Since his wife has his penis, he says to her "come on honey, all the guys are taking theirs...", a moment passes and he puts the phone back up to his ear and tells his buddy "she says no fucking way..." Remember that one? (IMG:style_emoticons/default/happy11.gif) |
Series9 |
Jun 23 2011, 07:57 PM
Post
#6
|
Lesbians taste like chicken. Group: Members Posts: 5,444 Joined: 22-August 04 From: DeLand, FL Member No.: 2,602 Region Association: South East States |
|
r_towle |
Jun 23 2011, 09:38 PM
Post
#7
|
Custom Member Group: Members Posts: 24,585 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
what is that injection setup?
Also, what is the ignition? Finally, what does that motor put out in 3.2 form? Rich |
MoveQik |
Jun 23 2011, 09:44 PM
Post
#8
|
What size wheels can I fit? Group: Members Posts: 4,645 Joined: 5-April 05 From: Scottsdale, AZ Member No.: 3,881 Region Association: Southwest Region |
It's all stock. As for HP, the specs say the US model was at 217hp, the Euro 3.2 was 231hp.
|
Elliot Cannon |
Jun 23 2011, 11:47 PM
Post
#9
|
914 Guru Group: Retired Members Posts: 8,487 Joined: 29-December 06 From: Paso Robles Ca. (Central coast) Member No.: 7,407 Region Association: None |
Joe doesn't actually let you touch anything does he? (IMG:style_emoticons/default/av-943.gif)
|
MoveQik |
Jun 24 2011, 12:00 AM
Post
#10
|
What size wheels can I fit? Group: Members Posts: 4,645 Joined: 5-April 05 From: Scottsdale, AZ Member No.: 3,881 Region Association: Southwest Region |
WTF??? I am really skilled at taking shit apart. (IMG:style_emoticons/default/biggrin.gif) And another thing...isn't this pretty late for a guy your age? (IMG:style_emoticons/default/howard.gif) |
Series9 |
Jun 24 2011, 05:51 AM
Post
#11
|
Lesbians taste like chicken. Group: Members Posts: 5,444 Joined: 22-August 04 From: DeLand, FL Member No.: 2,602 Region Association: South East States |
Actually, I'm totally impressed. For a guy who will tell you he has no mechanical skills, he's in pretty deep on a 3.2. Every pulled your 3.2? Oh, that's right, you just give them to the state of CA to be melted down.... (IMG:style_emoticons/default/shades.gif) |
Series9 |
Jun 24 2011, 05:58 AM
Post
#12
|
Lesbians taste like chicken. Group: Members Posts: 5,444 Joined: 22-August 04 From: DeLand, FL Member No.: 2,602 Region Association: South East States |
So I have a late night (read: alcohol induced) email from a certain customer saying:
(paraphrased) WTF? You're suggesting all these mods to Wills and not to me? I have money! I want that stuff! (IMG:style_emoticons/default/w00t.gif) I told this anonymous person to go with the ignition for $1700 because the whole package comes in at around $17k. (IMG:style_emoticons/default/wacko.gif) |
ellisor3 |
Jun 24 2011, 06:23 AM
Post
#13
|
HPWhore Group: Members Posts: 811 Joined: 23-October 08 From: Fleming Island, Florida Member No.: 9,683 Region Association: South East States |
Joe's garage rules are pretty simple:
1.) Leave your car here, Don't come back until it is ready. 2.) Don't touch anything, I charge for that 3. The dogs get overtime after 1pm- the 7 year rule you know 4.) I will call you when YOU run out of money. (IMG:style_emoticons/default/lol-2.gif) Attached image(s) |
r_towle |
Jun 24 2011, 07:34 AM
Post
#14
|
Custom Member Group: Members Posts: 24,585 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
what is that injection setup? Also, what is the ignition? Finally, what does that motor put out in 3.2 form? The motor above in the youtube link is what the questions refer to please. I am just curious what can be done going with that induction and ignition system and what the ROI is from a power perspective. Sound like Joe knows.... Rich |
MoveQik |
Jun 24 2011, 07:43 AM
Post
#15
|
What size wheels can I fit? Group: Members Posts: 4,645 Joined: 5-April 05 From: Scottsdale, AZ Member No.: 3,881 Region Association: Southwest Region |
So I have a late night (read: alcohol induced) email from a certain customer saying: (paraphrased) WTF? You're suggesting all these mods to Wills and not to me? I have money! I want that stuff! (IMG:style_emoticons/default/w00t.gif) I told this anonymous person to go with the ignition for $1700 because the whole package comes in at around $17k. (IMG:style_emoticons/default/wacko.gif) Tell Nelson to have another drink and relax. |
Series9 |
Jun 24 2011, 09:15 AM
Post
#16
|
Lesbians taste like chicken. Group: Members Posts: 5,444 Joined: 22-August 04 From: DeLand, FL Member No.: 2,602 Region Association: South East States |
what is that injection setup? Also, what is the ignition? Finally, what does that motor put out in 3.2 form? The motor above in the youtube link is what the questions refer to please. I am just curious what can be done going with that induction and ignition system and what the ROI is from a power perspective. Sound like Joe knows.... Rich The FI is the same as we're using on James'. Electromotive TEC gt, but the one in the video also has individual throttle body intake (+$2600). I don't have a dyno sheet. Probably 20ish HP for a total of $6k, but it looks really cool. |
Series9 |
Jun 24 2011, 09:20 AM
Post
#17
|
Lesbians taste like chicken. Group: Members Posts: 5,444 Joined: 22-August 04 From: DeLand, FL Member No.: 2,602 Region Association: South East States |
Hey Wills, did you look at the video I posted?
It's killing you, isn't it......... (IMG:style_emoticons/default/happy11.gif) |
MoveQik |
Jun 24 2011, 09:38 AM
Post
#18
|
What size wheels can I fit? Group: Members Posts: 4,645 Joined: 5-April 05 From: Scottsdale, AZ Member No.: 3,881 Region Association: Southwest Region |
Hey Wills, did you look at the video I posted? It's killing you, isn't it......... (IMG:style_emoticons/default/happy11.gif) Only because how dirt-free that motor is. Mine will be like that. Oh, you meant all the go-fast goodies?? |
r_towle |
Jun 24 2011, 11:03 AM
Post
#19
|
Custom Member Group: Members Posts: 24,585 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
what is that injection setup? Also, what is the ignition? Finally, what does that motor put out in 3.2 form? The motor above in the youtube link is what the questions refer to please. I am just curious what can be done going with that induction and ignition system and what the ROI is from a power perspective. Sound like Joe knows.... Rich The FI is the same as we're using on James'. Electromotive TEC gt, but the one in the video also has individual throttle body intake (+$2600). I don't have a dyno sheet. Probably 20ish HP for a total of $6k, but it looks really cool. lotta buck for the bang. I figured with new camshafts and the throttle body setup it might actually be doing something aside from posing. Rich |
Socalandy |
Jun 24 2011, 11:33 AM
Post
#20
|
Its got to be Yellow!!! Group: Members Posts: 2,432 Joined: 29-August 09 From: Orange Member No.: 10,742 Region Association: Southern California |
Twin plug it Wills (IMG:style_emoticons/default/poke.gif)
|
Lo-Fi Version | Time is now: 4th June 2024 - 02:35 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |