![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
Krieger |
![]()
Post
#1
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,803 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None ![]() ![]() |
The car is a 72. I am trying to figure out what some of the wires are for on the car to reuse for other purposes. The first is actually a round plug that sits in the access panel between the two seat. It has two yellow wires going to the plug. One of those wires runs forward on the tunnel. The second yellow wire goes? There is also a white wire to that same plug?
|
type47 |
![]()
Post
#2
|
Viermeister ![]() ![]() ![]() ![]() Group: Members Posts: 4,254 Joined: 7-August 03 From: Vienna, VA Member No.: 994 Region Association: MidAtlantic Region ![]() |
best I can do:
http://www.pelicanparts.com/914/parts/elec...lectric_71A.jpg http://www.pelicanparts.com/914/parts/elec...lectric_71b.jpg I can't see any component wth 2 yellows and a white..... |
jsayre914 |
![]()
Post
#3
|
Speed Up !!! ![]() ![]() ![]() ![]() Group: Members Posts: 3,210 Joined: 10-February 08 From: Timonium MD 21093 Member No.: 8,696 Region Association: MidAtlantic Region ![]() |
its not part of the seatbelt buzzer is it?
Attached image(s) ![]() |
Krieger |
![]()
Post
#4
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,803 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None ![]() ![]() |
I found the old seat belts. There is a plug coming off the two seat belt receivers that plugs into it. So now still the question where does the yellow and white wires go?
|
SirAndy |
![]()
Post
#5
|
Resident German ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 42,206 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California ![]() |
its not part of the seatbelt buzzer is it? If i'm not mistaken, the '72 cars didn't have a seat belt buzzer ... (IMG:style_emoticons/default/idea.gif) PS: Pictures would help! (IMG:style_emoticons/default/thisthreadisworthlesswithoutpics.gif) |
Krieger |
![]()
Post
#6
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,803 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None ![]() ![]() |
I have a new computer and this may be too big.
Attached image(s) ![]() |
Krieger |
![]()
Post
#7
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,803 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None ![]() ![]() |
Maybe too small?
|
Krieger |
![]()
Post
#8
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,803 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None ![]() ![]() |
Too big?
Attached thumbnail(s) ![]() |
Krieger |
![]()
Post
#9
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,803 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None ![]() ![]() |
Here is another one Im tackling. I removed the door buzzer switches and most of the wiring. I will not use them. Im left with this gray wire with a redish brown spiraling stripe coming from the ignition switch. It eventually, through the switches, ran to a plug with no relay on the fuse box....I think Can I just use shrink tubing over the end from the ig switch?
Attached thumbnail(s) ![]() |
Krieger |
![]()
Post
#10
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,803 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None ![]() ![]() |
This is where there is another matching wire from door contacts. Hook up to wire dangling from ig switch? Or cut off at the fuse box and use the wire danging from ignition to power something else in future?
Attached thumbnail(s) ![]() |
type47 |
![]()
Post
#11
|
Viermeister ![]() ![]() ![]() ![]() Group: Members Posts: 4,254 Joined: 7-August 03 From: Vienna, VA Member No.: 994 Region Association: MidAtlantic Region ![]() |
I suggest you look for wiring colors in the later track current flow diagrams on pelican; they are the 74-> (there is a link in my signature). I think there are fewer differences in color; more similarities with your 72 so you "should" be able to find your items...
|
Dave_Darling |
![]()
Post
#12
|
914 Idiot ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 15,161 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California ![]() ![]() |
Relay with a gray/red wire on the fuse panel looks to be a fog light relay. Are there also red/black, white/blue, and white/yellow wires?
The yellows and white does not look familiar, but I'm not very familiar with 72s, nor with the center tunnel wires. Are the wires a solid yellow and solid white? --DD |
Krieger |
![]()
Post
#13
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,803 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None ![]() ![]() |
Hey Dave, the relay only has one solid red and two of the gray/reds.
The yellow and whites are solid as best I can tell. |
Eric_Shea |
![]()
Post
#14
|
PMB Performance ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 19,304 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains ![]() ![]() |
Yellow and white turns the red light on on the dash... "Fasten Seat Belt" when there's a butt in the passengers cushion.
|
cwpeden |
![]()
Post
#15
|
Great White North, huh? ![]() ![]() ![]() Group: Members Posts: 916 Joined: 20-August 06 From: Victoria BC Member No.: 6,693 Region Association: Canada ![]() |
Yellow and white turns the red light on on the dash... "Fasten Seat Belt" when there's a butt in the passengers cushion. I agree, my 72 had sensor cushions with no lights or associated electronics? (IMG:style_emoticons/default/huh.gif) |
Krieger |
![]()
Post
#16
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,803 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None ![]() ![]() |
DOH! I have been looking at the wrong wiring diagram. I was not seeing the word "except" printed next to USA. I feel like a dummy. Its for seat belts.
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 9th May 2025 - 04:46 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |