New purchase '72 914-6 conversion, What should I do with it? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
New purchase '72 914-6 conversion, What should I do with it? |
BK911 |
Sep 9 2014, 06:13 AM
Post
#1
|
Senior Member Group: Members Posts: 672 Joined: 19-February 04 From: Rocky Top, TN Member No.: 1,674 Region Association: None |
Just took delivery of a '72 914-6 conversion and am a little disappointed in the car.
PO told me no accident or rust damage or repair, but the front end clearly has some poor repair work done to it, as well as lots of remaining crinkles in the pan. Alignment all looks good and the car tracks well, but I did not get what I thought I bought. http://www.914world.com/bbs2/index.php?sho...=219849&hl= Some pics: Beautiful car, until you really look at this: The lower left and right corner threaded bosses look like a bad boob job. Unfortunately I did not notice in time and am now stuck with the car. So trying to figure out my options. I paid $14k plus $1800 shipping and import fees, so say $16k invested. I have the '70S engine sold (pending payment) for $10k. That leaves a roller and $6k on the table. Now what? Sell the roller? Part out the car? I can use some of the parts for my '72 1.7. Build up a 2.4E with parts I already have and keep? Or sell with the 2.4E engine? Or ???? Please help!! (IMG:style_emoticons/default/headbang.gif) |
carr914 |
Sep 9 2014, 06:53 AM
Post
#2
|
Racer from Birth Group: Members Posts: 118,992 Joined: 2-February 04 From: Tampa,FL Member No.: 1,623 Region Association: South East States |
That car was FS for quite a while and that Pan Damage was pointed out by someone if not the Owner.
Did you inspect it in person before purchase? If you did not, then IMO, you did get what you paid for. |
Chris H. |
Sep 9 2014, 06:54 AM
Post
#3
|
Senior Member Group: Members Posts: 4,032 Joined: 2-January 03 From: Chicago 'burbs Member No.: 73 Region Association: Upper MidWest |
What's the extent of the damage? Front end accident? Does it look repairable?
|
DRPHIL914 |
Sep 9 2014, 06:55 AM
Post
#4
|
Dr. Phil Group: Members Posts: 5,768 Joined: 9-December 09 From: Bluffton, SC Member No.: 11,106 Region Association: South East States |
- I almost bought this car, but the discussions here came up and it was a concensus that the car must have been in and accident. as a result i was still interested in the car but not at the price he was asking or that you paid. I even sold my boxster with the idea of possibly getting that car, but since it sold that week- to you, i bought Jag for the wife and decided to keep working on my other 914 - - so sorry but it seemed quite obvious that this car had an issue. with that said if it drives straight and is aligned, and no rust i would have just drove it and kept it together, i think you still could have fixed that or just kept as is and sold it in a couple years for a profit. the way /6 conversion prices are going up------- why did you take the motor out and sell it?? just not sure why you would do that- i think you could have gotten more for the motor too. --- but i would NOT part out the car-- put a nice 2.0 motor in it, get that damage checked out better and maybe fix it or just leave alone - i think if you document that well since it is rust free and solid otherwise it will sell in one piece -- hey i'll give you $2500 for the tub right now (IMG:style_emoticons/default/wink.gif)
Edit: - fix your 2.4 E- put it in and sell it that way - |
Cairo94507 |
Sep 9 2014, 07:00 AM
Post
#5
|
Michael Group: Members Posts: 9,822 Joined: 1-November 08 From: Auburn, CA Member No.: 9,712 Region Association: Northern California |
I guess it depends upon what you really wanted/expected. That is a nice car as bought for a great price. Sure it may need someone like Scotty B. to straighten the front end and/or replace the front trunk pan- they are available new by Restoration Design I believe, but at 43 years of age you have to expect some minor wrinkles here and there. For the price you paid I think you got a great deal. Tell us what your thoughts are.
|
dknechtly |
Sep 9 2014, 07:06 AM
Post
#6
|
Yellow 914 Group: Members Posts: 68 Joined: 11-April 03 From: Wylie, TX Member No.: 560 Region Association: None |
Overall, it looks like a decent car. Since you say it is tracking good, if you want a good daily driver, hold on to it and enjoy. If the front really bothers you, most body shops could iron that out for a reasonable amount. Even with what you spent, it'd be very hard to build a 6 from scratch if you hire it all done. It just seems a shame to part it out.
|
BK911 |
Sep 9 2014, 07:52 AM
Post
#7
|
Senior Member Group: Members Posts: 672 Joined: 19-February 04 From: Rocky Top, TN Member No.: 1,674 Region Association: None |
That car was FS for quite a while and that Pan Damage was pointed out by someone if not the Owner. Did you inspect it in person before purchase? If you did not, then IMO, you did get what you paid for. Very helpful, thanks. I asked the seller specifically, besides the rockers, "Is there any accident or rust damage or repair?" The sellers response was, "No." So I bought a car that was advertised as NO ACCIDENT DAMAGE OR REPAIR. And that is not what I received. And I am not blaming the seller for being a liar, it is my fault for not paying closer attention and asking for more pictures. Yes the car tracks straight, and no obvious damage to the shock towers. Just disappointed to be purposely lied to. I would NOT have bought the car had I known. I sold the engine because I do not like the 2.2S engine. Too peaky for my tastes. I would love to get out and break even, and the only way I think I can do that is by parting out. There are some nice bits on the car, and I can use some of them for my other 914. Still undecided so please keep the opinions coming. |
Johny Blackstain |
Sep 9 2014, 07:58 AM
Post
#8
|
Walnut Elite Stratocaster player Group: Members Posts: 3,434 Joined: 5-December 06 From: The Shenandoah River Member No.: 7,318 Region Association: MidAtlantic Region |
Think I'd get the front pan straightened/repaired/replaced & put any six I could find back in there (since it's already six ready) & sell her as is. I think you'd get your $ back IF the rest of the car is as pretty & rust free as you say.
|
carr914 |
Sep 9 2014, 08:03 AM
Post
#9
|
Racer from Birth Group: Members Posts: 118,992 Joined: 2-February 04 From: Tampa,FL Member No.: 1,623 Region Association: South East States |
- I almost bought this car, but the discussions here came up and it was a concensus that the car must have been in and accident. as a result i was still interested in the car but not at the price he was asking or that you paid. I even sold my boxster with the idea of possibly getting that car, but since it sold that week- to you, i bought Jag for the wife and decided to keep working on my other 914 - - so sorry but it seemed quite obvious that this car had an issue. with that said if it drives straight and is aligned, and no rust i would have just drove it and kept it together, i think you still could have fixed that or just kept as is and sold it in a couple years for a profit. the way /6 conversion prices are going up------- why did you take the motor out and sell it?? just not sure why you would do that- i think you could have gotten more for the motor too. --- but i would NOT part out the car-- put a nice 2.0 motor in it, get that damage checked out better and maybe fix it or just leave alone - i think if you document that well since it is rust free and solid otherwise it will sell in one piece -- hey i'll give you $2500 for the tub right now (IMG:style_emoticons/default/wink.gif) Edit: - fix your 2.4 E- put it in and sell it that way - I agree about the 70 911S Motor - that was worth more than $10k |
matthepcat |
Sep 9 2014, 08:18 AM
Post
#10
|
Meat Popsicle Group: Members Posts: 1,462 Joined: 13-December 09 From: Saratoga CA Member No.: 11,125 Region Association: Northern California |
Your S motor probably could have paid off your car....they are reaching 20k range in running condition.
|
EdwardBlume |
Sep 9 2014, 08:27 AM
Post
#11
|
914 Wizard Group: Members Posts: 12,338 Joined: 2-January 03 From: SLO Member No.: 81 Region Association: Central California |
I would keep it together and drive it. Not saying anything about you being surprised or not.... its a /6 with an S motor. DRIVE IT. (IMG:style_emoticons/default/driving.gif)
|
billh1963 |
Sep 9 2014, 08:36 AM
Post
#12
|
Car Hoarder! Group: Members Posts: 3,402 Joined: 28-March 11 From: South Carolina Member No.: 12,871 Region Association: South East States |
Right now you are disappointed and not thinking clearly.
Do NOT sell the engine. At $10K you are getting taken. Get one of the good body guys in this forum to replace the truck pan and any other damaged metal. After 40 years there are few 914's that don't have some story (be it rust, accident damage, etc.). The car has some nice parts and once properly sorted is a $20K+ car. Real 914/6 heat exchangers are $$. You also have a 5 lug conversion, real Fuchs, real oil tank, and other bits that add up to BIG money. Bite the bullet, fix the damage, and you will be MUCH further ahead in the long run, I assure you. Once again...do NOT sell the engine. |
OllieG |
Sep 9 2014, 08:58 AM
Post
#13
|
OllieG Group: Members Posts: 212 Joined: 6-July 11 From: UK Member No.: 13,282 Region Association: England |
Right now you are disappointed and not thinking clearly. Do NOT sell the engine. At $10K you are getting taken. Get one of the good body guys in this forum to replace the truck pan and any other damaged metal. After 40 years there are few 914's that don't have some story (be it rust, accident damage, etc.). The car has some nice parts and once properly sorted is a $20K+ car. Real 914/6 heat exchangers are $$. You also have a 5 lug conversion, real Fuchs, real oil tank, and other bits that add up to BIG money. Bite the bullet, fix the damage, and you will be MUCH further ahead in the long run, I assure you. Once again...do NOT sell the engine. (IMG:style_emoticons/default/agree.gif) I don't get what the problem is?…the front pan is lumpy so you want to part it out and sell it on? Any other signs of accident damage? Why not just get it fixed professionally…looks like a nice car otherwise with a great motor, no? Restoration Design do a replacement pan. Just my 2 cents... |
Dave_Darling |
Sep 9 2014, 09:14 AM
Post
#14
|
914 Idiot Group: Members Posts: 14,991 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California |
Get a motor in it, and feel free to beat the snot out of it on the road or on the track! It's a conversion, so you don't have to feel bad about risking it on the streets, or pushing things on the track.
My advice: Get it running, then drive it like you stole it! If you want to save the 2.4 for a "perfect" conversion somewhere down the road, then consider an injected 3.2 motor. Awesome power, decent gas mileage, and the injection is not nearly as fussy as MFI or even as carbs. That has "driver" written all over it, IMHO. --DD |
BK911 |
Sep 9 2014, 09:35 AM
Post
#15
|
Senior Member Group: Members Posts: 672 Joined: 19-February 04 From: Rocky Top, TN Member No.: 1,674 Region Association: None |
Ok, thanks guys.
So not as big of a deal as I am making it. |
Chris H. |
Sep 9 2014, 10:37 AM
Post
#16
|
Senior Member Group: Members Posts: 4,032 Joined: 2-January 03 From: Chicago 'burbs Member No.: 73 Region Association: Upper MidWest |
|
gandalf_025 |
Sep 9 2014, 11:18 AM
Post
#17
|
Senior Member Group: Members Posts: 1,456 Joined: 25-June 09 From: North Shore, Massachusetts Member No.: 10,509 Region Association: North East States |
Maybe I missed something, but regardless of the crash damage.. Where is everyone getting that the engine is a real 70 S engine ?
All I saw in the ad was that it had S Cams.. Before everyone flips out, how about some documentation that it is really an S. Could be anything without a serial number. 10 grand for an unknown engine isn't unreasonable. Just saying... |
BK911 |
Sep 9 2014, 12:18 PM
Post
#18
|
Senior Member Group: Members Posts: 672 Joined: 19-February 04 From: Rocky Top, TN Member No.: 1,674 Region Association: None |
Maybe I missed something, but regardless of the crash damage.. Where is everyone getting that the engine is a real 70 S engine ? All I saw in the ad was that it had S Cams.. Before everyone flips out, how about some documentation that it is really an S. Could be anything without a serial number. 10 grand for an unknown engine isn't unreasonable. Just saying... I cant speak for everyone, but I am getting that the engine is a real 70 S engine because the car is in my shed and I verified the serial number on the case. 630xxxx. A real beyotch to see, but a flashlight and mirror did the trick. Any guesses as to value? No exhaust, induction or engine tin. |
BK911 |
Sep 9 2014, 12:30 PM
Post
#19
|
Senior Member Group: Members Posts: 672 Joined: 19-February 04 From: Rocky Top, TN Member No.: 1,674 Region Association: None |
Thanks Chris. $200 aint bad. But the work kinda sucks! Already have a car on the lift and one on the rotisserie. This one will stay as is until I get to her. As others have said, drive the pee out of her! Again, thanks for all the opinions. Talked me down off the ledge! |
gandalf_025 |
Sep 9 2014, 12:34 PM
Post
#20
|
Senior Member Group: Members Posts: 1,456 Joined: 25-June 09 From: North Shore, Massachusetts Member No.: 10,509 Region Association: North East States |
The real value of the engine would be finding the owner of the car it came out of. IF it still exists. Otherwise, prices are over the place.. Why are you wasting your time posting here. Go to the Early S Registry and put it there. They will know what the value is.
|
Lo-Fi Version | Time is now: 8th June 2024 - 01:16 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |