Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

 
 Reply to this topicStart new topic
> rear suspension
fduval
post May 17 2015, 06:48 PM
Post #1


Newbie
*

Group: Members
Posts: 41
Joined: 2-January 13
From: quebec
Member No.: 15,331
Region Association: Canada
Hi , I just changed my rear shocks today , put in new sport bilstein witn 140 lbs springs,
my rear end is about 3/4 inch lower on the right side versus the left side, . is there an adjustment screw that I can play with to get proper level on both sides ?

I am new to 914`s !!!!!!!!!!!!!! thanks
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post May 17 2015, 07:27 PM
Post #2


914-6 GT in waiting
***************

Group: Members
Posts: 19,578
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region
have you driven the car yet? Driving it will settle the shocks. After that, I got nothing.

(IMG:style_emoticons/default/welcome.png)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
fduval
post May 17 2015, 07:28 PM
Post #3


Newbie
*

Group: Members
Posts: 41
Joined: 2-January 13
From: quebec
Member No.: 15,331
Region Association: Canada
QUOTE(mepstein @ May 17 2015, 05:27 PM) *

have you driven the car yet? Driving it will settle the shocks. After that, I got nothing.


no, not driven yet . I will try that thks
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
bulitt
post May 17 2015, 08:23 PM
Post #4


Achtzylinder
****

Group: Members
Posts: 4,188
Joined: 2-October 11
Member No.: 13,632
Region Association: South East States
Sounds like the spring is not seated in the perch.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
fduval
post May 17 2015, 08:35 PM
Post #5


Newbie
*

Group: Members
Posts: 41
Joined: 2-January 13
From: quebec
Member No.: 15,331
Region Association: Canada
QUOTE(bulitt @ May 17 2015, 06:23 PM) *

Sounds like the spring is not seated in the perch.


I will have to verify that thanks
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
toon1
post May 17 2015, 08:41 PM
Post #6


Senior Member
***

Group: Members
Posts: 1,849
Joined: 29-October 05
From: tracy,ca
Member No.: 5,022
IIRC, bilsteins have adjustable perch locations, maybe they're different.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dave_Darling
post May 17 2015, 08:48 PM
Post #7


914 Idiot
***************

Group: Members
Posts: 15,051
Joined: 9-January 03
From: Silicon Valley / Kailua-Kona
Member No.: 121
Region Association: Northern California
At least some of the Bilstein shocks have a circlip around the shock body that the lower spring perch rides on. If the spring is in the perch, double-check the position of the circlip. You may need to slide the lower perch upward to see the clip.

--DD
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post May 17 2015, 09:26 PM
Post #8


914-6 GT in waiting
***************

Group: Members
Posts: 19,578
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region
Driving it will make a difference. Also, might measure out differently with some weight in the driver seat.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
fduval
post May 19 2015, 06:07 AM
Post #9


Newbie
*

Group: Members
Posts: 41
Joined: 2-January 13
From: quebec
Member No.: 15,331
Region Association: Canada
QUOTE(mepstein @ May 17 2015, 07:26 PM) *

Driving it will make a difference. Also, might measure out differently with some weight in the driver seat.


went for a short drive, the diff now is 1/4 inch side to side . I guess its acceptable. Thanks for all the inputs .
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post May 19 2015, 06:11 AM
Post #10


914-6 GT in waiting
***************

Group: Members
Posts: 19,578
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region
QUOTE(fduval @ May 19 2015, 08:07 AM) *

QUOTE(mepstein @ May 17 2015, 07:26 PM) *

Driving it will make a difference. Also, might measure out differently with some weight in the driver seat.


went for a short drive, the diff now is 1/4 inch side to side . I guess its acceptable. Thanks for all the inputs .

as he shocks continue to settle in it will probbable end up very close. (IMG:style_emoticons/default/driving.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
DRPHIL914
post May 19 2015, 08:49 AM
Post #11


Dr. Phil
*****

Group: Members
Posts: 5,809
Joined: 9-December 09
From: Bluffton, SC
Member No.: 11,106
Region Association: South East States
QUOTE(mepstein @ May 19 2015, 08:11 AM) *

QUOTE(fduval @ May 19 2015, 08:07 AM) *

QUOTE(mepstein @ May 17 2015, 07:26 PM) *

Driving it will make a difference. Also, might measure out differently with some weight in the driver seat.


went for a short drive, the diff now is 1/4 inch side to side . I guess its acceptable. Thanks for all the inputs .

as he shocks continue to settle in it will probbable end up very close. (IMG:style_emoticons/default/driving.gif)

(IMG:style_emoticons/default/agree.gif)
I have been running these shocks since i bought my car 6 years ago, so i have a question: why the 140# springs? i have found that the 100# springs with the stiffness of the sport bilistiens to be sufficient with street and some sport driving -- just wondering how much of a difference there is?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
pdlightning
post May 25 2015, 11:17 PM
Post #12


Member
**

Group: Members
Posts: 207
Joined: 4-February 11
From: Santa Clarita
Member No.: 12,660
Region Association: Southern California
QUOTE(Philip W. @ May 19 2015, 06:49 AM) *

QUOTE(mepstein @ May 19 2015, 08:11 AM) *

QUOTE(fduval @ May 19 2015, 08:07 AM) *

QUOTE(mepstein @ May 17 2015, 07:26 PM) *

Driving it will make a difference. Also, might measure out differently with some weight in the driver seat.


went for a short drive, the diff now is 1/4 inch side to side . I guess its acceptable. Thanks for all the inputs .

as he shocks continue to settle in it will probbable end up very close. (IMG:style_emoticons/default/driving.gif)

(IMG:style_emoticons/default/agree.gif)
I have been running these shocks since i bought my car 6 years ago, so i have a question: why the 140# springs? i have found that the 100# springs with the stiffness of the sport bilistiens to be sufficient with street and some sport driving -- just wondering how much of a difference there is?


A lot of people have gone with 180 and 200 springs. I wonder if they had sport Bilsteins?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Paragon
post May 26 2015, 08:19 PM
Post #13


Newbie
*

Group: Members
Posts: 49
Joined: 6-February 03
From: Corpus Christi, Texas
Member No.: 255
Region Association: Southwest Region
Where on the car are you measuring the ride height? If you're using the fender lip that's not always best..particularly if the car has ever been hit.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Eric_Shea
post May 26 2015, 08:57 PM
Post #14


PMB Performance
***************

Group: Admin
Posts: 19,289
Joined: 3-September 03
From: Salt Lake City, UT
Member No.: 1,110
Region Association: Rocky Mountains
140's are perfect with a 19mm adjustable bar up front.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
ConeDodger
post May 26 2015, 10:40 PM
Post #15


Apex killer!
***************

Group: Members
Posts: 23,799
Joined: 31-December 04
From: Tahoe Area
Member No.: 3,380
Region Association: Northern California
QUOTE(Philip W. @ May 19 2015, 05:49 AM) *

QUOTE(mepstein @ May 19 2015, 08:11 AM) *

QUOTE(fduval @ May 19 2015, 08:07 AM) *

QUOTE(mepstein @ May 17 2015, 07:26 PM) *

Driving it will make a difference. Also, might measure out differently with some weight in the driver seat.


went for a short drive, the diff now is 1/4 inch side to side . I guess its acceptable. Thanks for all the inputs .

as he shocks continue to settle in it will probbable end up very close. (IMG:style_emoticons/default/driving.gif)

(IMG:style_emoticons/default/agree.gif)
I have been running these shocks since i bought my car 6 years ago, so i have a question: why the 140# springs? i have found that the 100# springs with the stiffness of the sport bilistiens to be sufficient with street and some sport driving -- just wondering how much of a difference there is?


Ummm... 40# Phillip. (IMG:style_emoticons/default/blink.gif)

Seriously, The shocks and springs do a different job. Mine are 200# springs and I use that to deal with the heavier weight of the 3.2 liter Carrera motor. My shocks are Koni adjustables set to full. While this might sound like I have a harsh ride, I don't. The Elephant bushings allow everything to do its job. The springs to bounce the car up and down, the shocks to keep things from bouncing up and down too much. I do use a rear stock sway bar to balance out the much larger Tarret front bar.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
fduval
post May 27 2015, 12:20 PM
Post #16


Newbie
*

Group: Members
Posts: 41
Joined: 2-January 13
From: quebec
Member No.: 15,331
Region Association: Canada
QUOTE(ConeDodger @ May 26 2015, 08:40 PM) *

QUOTE(Philip W. @ May 19 2015, 05:49 AM) *

QUOTE(mepstein @ May 19 2015, 08:11 AM) *

QUOTE(fduval @ May 19 2015, 08:07 AM) *

QUOTE(mepstein @ May 17 2015, 07:26 PM) *

Driving it will make a difference. Also, might measure out differently with some weight in the driver seat.


went for a short drive, the diff now is 1/4 inch side to side . I guess its acceptable. Thanks for all the inputs .

as he shocks continue to settle in it will probbable end up very close. (IMG:style_emoticons/default/driving.gif)

(IMG:style_emoticons/default/agree.gif)
I have been running these shocks since i bought my car 6 years ago, so i have a question: why the 140# springs? i have found that the 100# springs with the stiffness of the sport bilistiens to be sufficient with street and some sport driving -- just wondering how much of a difference there is?


Ummm... 40# Phillip. (IMG:style_emoticons/default/blink.gif)

Seriously, The shocks and springs do a different job. Mine are 200# springs and I use that to deal with the heavier weight of the 3.2 liter Carrera motor. My shocks are Koni adjustables set to full. While this might sound like I have a harsh ride, I don't. The Elephant bushings allow everything to do its job. The springs to bounce the car up and down, the shocks to keep things from bouncing up and down too much. I do use a rear stock sway bar to balance out the much larger Tarret front bar.


Yep the car now seats even on both sides, ride is a bit stiffer than when I ran stock but still smooth, not aggressive. at all. But I wonder if I should go with 180 pnds if I drop a 2.7 1974 flat 6 in it ....?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post May 27 2015, 12:33 PM
Post #17


914-6 GT in waiting
***************

Group: Members
Posts: 19,578
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region
I think springs and suspension setups are also location dependent. After our winter, east coast roads are terrible. Probably a lot rougher ride compared to Southern California.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 31st October 2024 - 07:03 PM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...