Newbie, questions from an inquisitor |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Newbie, questions from an inquisitor |
jeg242s |
Mar 16 2005, 11:32 PM
Post
#1
|
Newbie Group: Members Posts: 5 Joined: 16-March 05 From: Rocheport, MO Member No.: 3,772 |
I am considering getting into the 914 thing. I currently am rebuilding a 1989 Jeep Cherokee significant rust etc. etc. etc. My question is how much more difficult is it to maintain a 914? I am ok mechanially and was wondering if I could maintain a 914, I would love to learn about it and you guys seem to have a lot of information to dispose. Thanks in advance.
|
scotty914 |
Mar 16 2005, 11:38 PM
Post
#2
|
suby torque rules Group: Members Posts: 1,525 Joined: 20-July 03 From: maryland, the land of 25 year Member No.: 924 |
well body repair will be about the same skill levels, but much more practice on a bad 914. routine mantaince on a 914 is much more than a 89 jeep, figure about 1 to 2 hours every 3000 miles.
but driving it will hook ya real quick, but make sure you buy a car you can drive for a while. that way a year from now when you have it on jack stands you will remember why you are doing it. |
nebreitling |
Mar 16 2005, 11:51 PM
Post
#3
|
Member Emeritus Group: Members Posts: 3,314 Joined: 26-March 03 From: San Francisco Member No.: 478 |
Welcome to the board!
you can do it. this board can help. just be prepared for it to cost you some significant time and money. get a driver, too. that way, before you take it apart, you will have at least gotten some joy out of it, which will sustain you through months of busting your knuckles and watching cash fly out of your ass. DO IT (IMG:http://www.914world.com/bbs2/html/emoticons/aktion035.gif) |
bare 1 |
Mar 17 2005, 12:00 AM
Post
#4
|
Member Group: Members Posts: 122 Joined: 27-October 04 From: Apache Junction viaWhidbey Is. Member No.: 3,019 Region Association: None |
Yea takin 90 degree corners that go off camber comin out at 45 on flat ground without tryin real hard is kinda a rush. Weeeee! (IMG:http://www.914world.com/bbs2/html/emoticons/driving.gif) And it's stock!!
|
ThinAir |
Mar 17 2005, 12:12 AM
Post
#5
|
Best friends Group: Members Posts: 2,543 Joined: 4-February 03 From: Flagstaff, AZ Member No.: 231 Region Association: Southwest Region |
From the sounds of what you are doing to the Jeep, you'll have no trouble with 914 work. The others have described it pretty well, although the cost estimates may be a bit high.
Having said that, I'll give you an idea of how addictive having a 914 is: I've got a 72 that I stripped to restore it, then found out it was gonna cost 3x more than the initial estimate (and I lost my job about the same time) so I put it up on jackstands to get back to eventually. 2 years ago I got a new job (after only being off for 3 months). The first thing I did was start shopping the classifieds here for a new 914. I found a nice 73 in Seattle, flew up there with my son and drove it back in a weekend. The car is very nice, but the PO had put a bad cam in it and it went flat on the trip. So I installed the engine that I had obtained for the 72. In January (a year ago), I blew out one of the oil galley plugs and lost all the oil. I thought I had an indicator light problem, but plenty of oil so I drove it - 2 miles later I had a frozen up engine. So the nice 73 has been up on jackstands while I've patiently collected parts. They are all readily available. I just didn't want to shock the budget by doing it all at once. Last weekend I finally got about half the engine put together. I purposely work slow and methodically because I don't want to risk anything going wrong. Before it goes back on the road I also have to get the clutch tube repaired (welding) - that will happen on Easter weekend. I'm also moving the fuel pump from the engine area to the front of the car. I'm hopeful that I'll have it done in time for the Route 66 Classic in June. Bear in mind that not every project will take this much time. I live at 7,000 feet and get snow in the winter (and don't have a garage) so I have some issues that warm weather folks don't have. When I get it done I'm gonna have my dream car - and my smile on that first drive is gonna be sooooo BIG that the folks in Southern CA will probably be able to see it! (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) These cars are definitely worth the effort and with the aid of this group you can tackle anything! |
Always Looking |
Mar 17 2005, 12:29 AM
Post
#6
|
Member Group: Members Posts: 194 Joined: 9-December 04 From: Orange, CA Member No.: 3,246 |
My only previous experience was a 68 Baja bug in High school that I picked up and drove for two years. 10 years later, I bought my 72 914. Once I got over the Fuel Injection fears, the car is pretty simple to maintain. You can do it. Also costs... I picked up a non-running beater, invested $400 in tires, $200 in parts and $1000 in tools and have a running machine (Don't know how well yet..) Still need suspension and paint and body which is where the real expense is (I think). This board is invaluable.
Good luck (IMG:http://www.914world.com/bbs2/html/emoticons/beerchug.gif) |
jeg242s |
Mar 17 2005, 12:33 AM
Post
#7
|
Newbie Group: Members Posts: 5 Joined: 16-March 05 From: Rocheport, MO Member No.: 3,772 |
Thanks for all the positives guys. I WILL be back here frequently.... and you know what tha means.
|
skline |
Mar 17 2005, 01:09 AM
Post
#8
|
Born to Drive Group: Members Posts: 7,910 Joined: 26-December 02 From: Costa Mesa, CA Member No.: 17 Region Association: Southern California |
Where is Roachport Missouri? I used to live in Kansas City and the surrounding areas. Anyway, to hear these guys talk, its a never ending money pit. Do listen to them 100%. Only about 70%. They can cost a lot of money if you have to do a lot to the car. Body work is included in that also. The engines, you can build yourself for less than you can buy one already done. However, an already to go engine from a reputable place can save you a lot of headaches. I have built about 8 or 10 engines and I just like doing it. Others may not enjoy it as much as I do. Sometimes you make mistakes and they can be costly. Its called the learning curve. They are not kidding about how much fun they are to drive. There isnt another car out there for the money that can do what these cars can do in stock form. If you like them, get one and start driving it. You will be hooked.
|
Rhodes71/914 |
Mar 17 2005, 11:19 AM
Post
#9
|
Glacier Group: Members Posts: 1,374 Joined: 8-August 04 From: End of the Road, Alaska Member No.: 2,482 |
Get rid of that Jeep as soon as you are done fixing it and buy a 914. That thing is getting close to 20 years old and will give you nothing but grief. The 914 may give you some grief but it sure is a hellava lot more fun to drive.
Everybody talks about cost to maintain, well here is my experience so far - I bought my car for $700 not running couple hundred and I got it running. Engine was tired though. $500 got me a 2.0 and sideshift trans. New rings and other little things for the 2.0 and some new tires and I have about $2000 into the car and it is sooo much fun. |
rhodyguy |
Mar 17 2005, 11:56 AM
Post
#10
|
Chimp Sanctuary NW. Check it out. Group: Members Posts: 22,093 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch |
plan on spending $2k more than you want to. that will cover the $4k plus the current owner has thrown at it so far and has just come out of the gate. it can add up so fast you'll be (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/screwy.gif)
k |
Lo-Fi Version | Time is now: 9th June 2024 - 08:41 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |