![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
914 RZ-1 |
![]()
Post
#1
|
Porsche Padawan ![]() ![]() ![]() Group: Members Posts: 683 Joined: 17-December 14 From: Santa Clarita, CA Member No.: 18,230 Region Association: Southern California ![]() |
I'm adding washer fluid pump to my '72. I got a pump and switch. I want to make sure I'm wiring it correctly:
1. Negative on pump goes to ground somewhere on bare metal on car. 2. Positive on pump goes to "LOAD" tab on switch. 3. "EARTH" on switch goes to ground somewhere on bare metal on car. 4. "LOAD" on switch goes to + on pump. 5. "SUPPLY" on switch goes to fuse (#8 or #10, I think), which supplies the power. Is this correct? ![]() I got the switch at Radio Shack. It's a "push-to-work" and a light on the switch goes on. It needs to be pushed again to shut it off. I got the pump at Pelican. Thanks! |
Valy |
![]()
Post
#2
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,677 Joined: 6-April 10 From: Sunnyvale, CA Member No.: 11,573 Region Association: Northern California ![]() |
It's right but why don't you use a Porsche wiper switch with electric pump activation?
It's been discussed here a lot. Just search my posts on this topic. I'm adding washer fluid pump to my '72. I got a pump and switch. I want to make sure I'm wiring it correctly: 1. Negative on pump goes to ground somewhere on bare metal on car. 2. Positive on pump goes to "LOAD" tab on switch. 3. "EARTH" on switch goes to ground somewhere on bare metal on car. 4. "LOAD" on switch goes to + on pump. 5. "SUPPLY" on switch goes to fuse (#8 or #10, I think), which supplies the power. Is this correct? ![]() I got the switch at Radio Shack. It's a "push-to-work" and a light on the switch goes on. It needs to be pushed again to shut it off. I got the pump at Pelican. Thanks! |
914 RZ-1 |
![]()
Post
#3
|
Porsche Padawan ![]() ![]() ![]() Group: Members Posts: 683 Joined: 17-December 14 From: Santa Clarita, CA Member No.: 18,230 Region Association: Southern California ![]() |
[quote name='Valy' date='Apr 29 2017, 04:18 PM' post='2480953']
It's right but why don't you use a Porsche wiper switch with electric pump activation? It's been discussed here a lot. Just search my posts on this topic. I saw all those. This is easier. |
BillC |
![]()
Post
#4
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 549 Joined: 24-April 15 From: Silver Spring, MD Member No.: 18,667 Region Association: MidAtlantic Region ![]() ![]() |
If you're going to use a separate switch for the pump, look for a momentary-on switch. That way, it only pumps while you hold the button/toggle and stops when you let go.
|
914werke |
![]()
Post
#5
|
"I got blisters on me fingers" ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 10,156 Joined: 22-March 03 From: USofA Member No.: 453 Region Association: Pacific Northwest ![]() ![]() |
or this
Attached image(s) ![]() |
SirAndy |
![]()
Post
#6
|
Resident German ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 41,688 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California ![]() |
If you're going to use a separate switch for the pump, look for a momentary-on switch. That way, it only pumps while you hold the button/toggle and stops when you let go. (IMG:style_emoticons/default/agree.gif) http://www.914world.com/specs/tech_el_washer.php (IMG:style_emoticons/default/smile.gif) |
Spoke |
![]()
Post
#7
|
Jerry ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,992 Joined: 29-October 04 From: Allentown, PA Member No.: 3,031 Region Association: None ![]() ![]() |
I'm adding washer fluid pump to my '72. I got a pump and switch. I want to make sure I'm wiring it correctly: 1. Negative on pump goes to ground somewhere on bare metal on car. 2. Positive on pump goes to "LOAD" tab on switch. 3. "EARTH" on switch goes to ground somewhere on bare metal on car. 4. "LOAD" on switch goes to + on pump. 5. "SUPPLY" on switch goes to fuse (#8 or #10, I think), which supplies the power. Is this correct? ![]() I got the switch at Radio Shack. It's a "push-to-work" and a light on the switch goes on. It needs to be pushed again to shut it off. I got the pump at Pelican. Thanks! On your schematic, swap ground and +12V. +12V should be wired to the pump through a fuse. The negative side of the pump should go through the switch to ground. This way if any of the switch wires accidentally are shorted to ground, you won't blow a fuse. Also as SirAndy mentioned, the switch should be momentary ON switch, not latching as described. |
jcd914 |
![]()
Post
#8
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,081 Joined: 7-February 08 From: Sacramento, CA Member No.: 8,684 Region Association: Northern California ![]() |
I'm adding washer fluid pump to my '72. I got a pump and switch. I want to make sure I'm wiring it correctly: 1. Negative on pump goes to ground somewhere on bare metal on car. 2. Positive on pump goes to "LOAD" tab on switch. 3. "EARTH" on switch goes to ground somewhere on bare metal on car. 4. "LOAD" on switch goes to + on pump. 5. "SUPPLY" on switch goes to fuse (#8 or #10, I think), which supplies the power. Is this correct? I got the switch at Radio Shack. It's a "push-to-work" and a light on the switch goes on. It needs to be pushed again to shut it off. I got the pump at Pelican. Thanks! On your schematic, swap ground and +12V. +12V should be wired to the pump through a fuse. The negative side of the pump should go through the switch to ground. This way if any of the switch wires accidentally are shorted to ground, you won't blow a fuse. Also as SirAndy mentioned, the switch should be momentary ON switch, not latching as described. I am going to disagree with Spoke on switching your wires around. It is always best practice to make your "normally hot" leg of a circuit as short as possible. That way under normal conditions there is a shorter stretch of wire that can be shorted. In this case that is the wire from the fused power supply to the switch. The fuses are under that dash the switch connections will be under that dash, not much wire there. the pump on the other hand probably will be mounted near washer bottle, significantly farther from the fuse panel. But he is correct you should be using a momentary contact switch. Jim |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 16th June 2024 - 09:25 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |