 other T-4s, As far as parts |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| karmanbuilt |
 May 31 2018, 04:50 PM
Post
#1
|
|
???  Group: Members Posts: 72 Joined: 7-July 08 From: Emmett, ID. Member No.: 9,262 Region Association: Pacific Northwest  |
Don't know if this question has been asked b-4, but as to the T-4 411/412 are any of the engine parts interchangeable with ours? Also if any one knows how long of a run they had, and what displacement the motors were......just wondering. Thanks (IMG:style_emoticons/default/sunglasses.gif)
|
   |
 
|
| JeffBowlsby |
May 31 2018, 05:09 PM
Post
#2
|
|
914 Wiring Harnesses & Beekeeper Group: Members Posts: 8,969 Joined: 7-January 03 From: San Ramon CA Member No.: 104 Region Association: None 
|
Here is my interchangeable parts list. Its not complete but its a start.
http://bowlsby.net/914/Classic/zTN_Gen_914...Interchange.xls |
|
|
|
| jcd914 |
May 31 2018, 05:16 PM
Post
#3
|
|
Advanced Member Group: Members Posts: 2,096 Joined: 7-February 08 From: Sacramento, CA Member No.: 8,684 Region Association: Northern California |
Type 4 engine went from 1968 to 1982 or 1983.
Three stock sizes 1.7L, 1.8L and 2.0L. Two Fuel Injection types (D-jet & L-jet) and a few different carburetor set ups. |
|
|
|
| r_towle |
May 31 2018, 05:36 PM
Post
#4
|
|
Custom Member Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States
|
QUOTE(Jeff Bowlsby @ May 31 2018, 07:09 PM)  Here is my interchangeable parts list. Its not complete but its a start. http://bowlsby.net/914/Classic/zTN_Gen_914...Interchange.xls Damn Jeff, that is a fantastic Asset for the community!!! thanks for that rich |
|
|
|
| Mark Henry |
May 31 2018, 05:45 PM
Post
#5
|
|
that's what I do! Group: Members Posts: 20,065 Joined: 27-December 02 From: Port Hope, Ontario Member No.: 26 Region Association: Canada |
411/412 are 1700/1800
The cases are the same except for the different app drillings of the cases. FI, dipstick, fuel pump, oil fill, etc. Porsche was responsible for the development of the 2.0 crank and rods and is why they have the oddball 039 xxx xxx part numbers. The VW heads will work, but 2.0 3 bolt heads are again 039 developed (modified) by porsche. The 1800 heads have the S deination with slightly larger valves. There's a whole bunch of other minor details like smaller dish on pistons, etc. |
|
|
|
| Mark Henry |
May 31 2018, 06:01 PM
Post
#6
|
|
that's what I do! Group: Members Posts: 20,065 Joined: 27-December 02 From: Port Hope, Ontario Member No.: 26 Region Association: Canada |
dp
|
|
|
|
| Mark Henry |
May 31 2018, 06:02 PM
Post
#7
|
|
that's what I do! Group: Members Posts: 20,065 Joined: 27-December 02 From: Port Hope, Ontario Member No.: 26 Region Association: Canada |
QUOTE(Jeff Bowlsby @ May 31 2018, 07:09 PM) Here is my interchangeable parts list. Its not complete but its a start. http://bowlsby.net/914/Classic/zTN_Gen_914...Interchange.xls I realize it's still under construction I only took a quick look and I may be reading it wrong, but I believe a few items are wrong. The type 3 was always a Type 1 engine and never bigger than a 1600cc. The 411/412 ended production in '72 (411, 1.7) and '74 (412, 1.8) and never had bigger than a 1.8 in the 412. I don't think the 2.0 bus was available till 1976. I didn't look at the rest of the list yet. |
|
|
|
| JeffBowlsby |
May 31 2018, 06:49 PM
Post
#8
|
|
914 Wiring Harnesses & Beekeeper Group: Members Posts: 8,969 Joined: 7-January 03 From: San Ramon CA Member No.: 104 Region Association: None
|
I have developed this over many years from various sources...if anyone has any improvements or anything to add to make it better, mark them up, post it or email it to me and I will update the worksheet.
|
|
|
|
| karmanbuilt |
Jun 1 2018, 07:38 PM
Post
#9
|
|
??? Group: Members Posts: 72 Joined: 7-July 08 From: Emmett, ID. Member No.: 9,262 Region Association: Pacific Northwest |
Thanks to all who gave their input. It never ceases to amaze me at the wealth of combined knowledge stored in this club. I'm leaving my beloved car to my daughter when I pass on, and will tell her a great bunch of people of 914 World will help you just as they did for me..........
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th July 2025 - 05:04 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.