![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
raw1298 |
![]()
Post
#1
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 616 Joined: 9-March 09 From: Rocklin,Ca. Member No.: 10,148 Region Association: Northern California ![]() |
Is there a place in Sacramento you can get metal bumpers straightened?
|
DucRS |
![]()
Post
#2
|
Member ![]() ![]() Group: Members Posts: 105 Joined: 29-May 19 From: Riverbank CA Member No.: 23,173 Region Association: Central California ![]() |
I hear Sherms Plating in Sac does good work. I sent them some pics of a front bumper that needed a few dings removed and chrome plating, they sent me a quote of $750. I figured that wasn’t too bad. Oh, and they said it would take approximately three months.
|
raw1298 |
![]()
Post
#3
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 616 Joined: 9-March 09 From: Rocklin,Ca. Member No.: 10,148 Region Association: Northern California ![]() |
I just need them straightened. Going to paint them.
|
bkrantz |
![]()
Post
#4
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,821 Joined: 3-August 19 From: SW Colorado Member No.: 23,343 Region Association: Rocky Mountains ![]() ![]() |
Then any competent body shop. And with paint you can use filler for the final surface smoothing, so should be much faster and cheaper.
|
flat4guy |
![]()
Post
#5
|
Member ![]() ![]() Group: Members Posts: 445 Joined: 10-October 16 From: nor cal Member No.: 20,484 Region Association: Northern California ![]() |
Classic Chrome on Franklin
|
ConeDodger |
![]()
Post
#6
|
Apex killer! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 23,623 Joined: 31-December 04 From: Tahoe Area Member No.: 3,380 Region Association: Northern California ![]() ![]() |
I used AAAbumper repair over by McClellan.
|
Chris914n6 |
![]()
Post
#7
|
Jackstands are my life. ![]() ![]() ![]() ![]() Group: Members Posts: 3,341 Joined: 14-March 03 From: Las Vegas, NV Member No.: 431 Region Association: Southwest Region ![]() |
Oscar offered to straighten and paint black my pair for 2 bills back during his mass re-chroming group offer.
|
jcd914 |
![]()
Post
#8
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,081 Joined: 7-February 08 From: Sacramento, CA Member No.: 8,684 Region Association: Northern California ![]() |
I didn't realize there were some many choices here in Sac.
I already have nice set chrome bumpers but I do need a couple of small parts chromed. @ConeDodger Rob wasn't there a small chrome shop here that you and Mark used? Jim |
raw1298 |
![]()
Post
#9
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 616 Joined: 9-March 09 From: Rocklin,Ca. Member No.: 10,148 Region Association: Northern California ![]() |
Thanks for all the responses!
|
ConeDodger |
![]()
Post
#10
|
Apex killer! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 23,623 Joined: 31-December 04 From: Tahoe Area Member No.: 3,380 Region Association: Northern California ![]() ![]() |
I didn't realize there were some many choices here in Sac. I already have nice set chrome bumpers but I do need a couple of small parts chromed. @ConeDodger Rob wasn't there a small chrome shop here that you and Mark used? Jim Jim, Of late, I’ve used Ogden Chrome in Utah. I did use a small shop on the south end of McLellan’s runways called AA or AAA. T won’t be the same owner as he was about to retire when he did both my 914 and my 240Z. I’ve been mostly happy with Ogden and they ship free. Doesn’t @OscarValco do something with chrome or bumpers? |
ValcoOscar |
![]()
Post
#11
|
Garage Life ![]() ![]() ![]() ![]() Group: Members Posts: 2,393 Joined: 19-November 13 From: SoCal Member No.: 16,669 Region Association: Southern California ![]() ![]() ![]() |
A few good chrome shops remain. I’ve heard the shop in Utah does great work. No idea on cost.
In my case, I did a large GB of Early Bumper repair & re-chroming. Ultimately finished about 130 bumpers. Great results, but hated the lead-times. Sometimes it took two weeks, other times over six weeks. I started by pressure washing, bead blasting, repair to re-thread M8 mounting points, and checked for straightness against a jig Bruce Stone and I made. Then I would send them over to the chrome shop for triple chrome. Chrome shop has had a few issues with turn-over during the past year so It’s difficult to keep up with my expected quality. I have 7 bumpers in queue for a mid-west member. Bruce Stone and I have 3 bumpers at chome now. Should have them back any day. Bottom line, if you a nice straight bumper with no dents that just need re-chroming, and maybe thread repair. I can handle refurbishment for less than $400. Currently, I’m not accepting overly rusty or dented bumpers. Straight bumpers are a breeze. Few dents are okay too. Let me know if I can help. BTW... @mb911 is the go-to guy for GT opening modifications prior to chrome. O ![]() ![]() ![]() |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 17th June 2024 - 02:47 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |