Seat back replacement |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Seat back replacement |
bajafreaks |
May 10 2023, 01:39 PM
Post
#1
|
Member Group: Members Posts: 73 Joined: 7-February 14 From: Gardnerville, Nevada Member No.: 16,969 Region Association: Northern California |
Has anyone had experience with using the plastic 3-piece seat back replacements 914 rubber has available? my original seat back is completely gone and good used are hard to find.
|
Puebloswatcop |
May 10 2023, 06:00 PM
Post
#2
|
Senior Member Group: Members Posts: 1,389 Joined: 27-December 14 From: Mineola, Texas Member No.: 18,258 Region Association: Southwest Region |
|
bajafreaks |
May 10 2023, 06:29 PM
Post
#3
|
Member Group: Members Posts: 73 Joined: 7-February 14 From: Gardnerville, Nevada Member No.: 16,969 Region Association: Northern California |
Has anyone had experience with using the plastic 3-piece seat back replacements 914 rubber has available? my original seat back is completely gone and good used are hard to find. Are you talking about the 3 piece plastic back pad core? Yes...https://914rubber.com/thermal-formed-3-piece-back-pad-core-1 |
bajafreaks |
May 11 2023, 08:04 AM
Post
#4
|
Member Group: Members Posts: 73 Joined: 7-February 14 From: Gardnerville, Nevada Member No.: 16,969 Region Association: Northern California |
|
Mikey914 |
May 11 2023, 08:34 AM
Post
#5
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
We are doing another run on these and will have them ready in about 2 weeks. If you need one right away, PM me I have one in my personal stash I can get you.
-Mark PS some folks have simply covered these in perlon and opted out on the foam and vinyl. |
Literati914 |
May 11 2023, 11:25 AM
Post
#6
|
Senior Member Group: Members Posts: 1,475 Joined: 16-November 06 From: Dallas, TX Member No.: 7,222 Region Association: Southwest Region |
I used this product to reupholster a backpad for another member here, about a year and a half ago. It's a good product but if you plan to upholster it as original, then the real problem is the foam. If you can re-use your original foam, then it's great. or source used foam if you can. If not, then you have to try to custom sculpt the foam.. which is what I had to do. It came out great but I'd only do it again as a labor of love (would have to charge way too much as a service to accurately sculpt out the foam for a customer). The original foam is not a simple design, luckily I had my own personal originals to go by.
. |
bajafreaks |
May 11 2023, 03:47 PM
Post
#7
|
Member Group: Members Posts: 73 Joined: 7-February 14 From: Gardnerville, Nevada Member No.: 16,969 Region Association: Northern California |
We are doing another run on these and will have them ready in about 2 weeks. If you need one right away, PM me I have one in my personal stash I can get you. -Mark PS some folks have simply covered these in perlon and opted out on the foam and vinyl. Thanks for the info/offer. I'm a ways out before needing it. I would definitely entertain just wrapping with no foam, although I'd be curious to see how one looks before doing it. |
bajafreaks |
May 11 2023, 03:49 PM
Post
#8
|
Member Group: Members Posts: 73 Joined: 7-February 14 From: Gardnerville, Nevada Member No.: 16,969 Region Association: Northern California |
I used this product to reupholster a backpad for another member here, about a year and a half ago. It's a good product but if you plan to upholster it as original, then the real problem is the foam. If you can re-use your original foam, then it's great. or source used foam if you can. If not, then you have to try to custom sculpt the foam.. which is what I had to do. It came out great but I'd only do it again as a labor of love (would have to charge way too much as a service to accurately sculpt out the foam for a customer). The original foam is not a simple design, luckily I had my own personal originals to go by. . Dont have any of the original back piece, foam, or covering so it would be from scratch. I would definitely entertain as mentioned, going without the foam just curious how it looks? Thanks |
Lo-Fi Version | Time is now: 5th June 2024 - 01:05 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |