Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Mallory Unilite Ignition Wire
Geezer914
post May 22 2023, 09:52 AM
Post #1


Geezer914
***

Group: Members
Posts: 1,749
Joined: 18-March 09
From: Salem, NJ
Member No.: 10,179
Region Association: North East States



Mallory Unilite on an Ljet. Am I correct using the wire from pin 7 (black/red stripe together with the black wire) on the 12 pin connector as the wire from the ignition switch? So the wire from pin 7 along with the red wire going to the distributor connect together on one side of the ballast resistor and the other side of the ballast connects to the + side of the coil?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 31st October 2024 - 05:10 PM