![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
Rand |
![]()
Post
#1
|
Cross Member ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,411 Joined: 8-February 05 From: OR Member No.: 3,573 Region Association: None ![]() |
After having my second door handle break, I decided to do something different.
I made a lever out of a piece of tubing. Drilled a hole through one end that fits over a pin that I welded to the door. Flattened the other end and smoothed it out. (IMG:http://www.914world.com/bbs2/uploads/blog-1129058039.jpg) Welded a hook to the lever that goes inward. A wire loop runs between the hook and the release latch inside... (IMG:http://www.914world.com/bbs2/uploads/blog-1129058030.jpg) Lift up on the lever to open, the spring returns it to the bottom stop... (IMG:http://www.914world.com/bbs2/uploads/blog-1129058052.jpg) Weld a piece of sheet metal across the surface to shave the door handle, and the crude design is hidden for a clean look. Keeping the recess behind the door makes it convenient to reach a finger behind and lift the latch. It releases easier than ever and won't break. (IMG:http://www.914world.com/bbs2/uploads/blog-1129058021.jpg) (Ok, I figure someone will ask, so... No, I don't miss the door locks. I never lock the doors. I keep valuables locked in the trunk and have a hidden ignition cut off switch for theft protection. (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif) ) |
Mueller |
![]()
Post
#2
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,155 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
pretty ingenious !!!!!
I like it....the wire looks a little on the thin side..... |
Rand |
![]()
Post
#3
|
Cross Member ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,411 Joined: 8-February 05 From: OR Member No.: 3,573 Region Association: None ![]() |
Yeah, the wire in the photo seems a bit hoaky. I was planning on making a nicer piece there... maybe washers welded to the ends of a piece of small rod. But it lifts so easily that my temporary wire isn't stressing at all. Maybe I'll get around to upgrading that piece later. (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)
|
URY914 |
![]()
Post
#4
|
I built the lightest 914 in the history of mankind. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 126,369 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None ![]() |
And we wonder why people say 914 owners are cheap?
Good work, the factory should have done that in the first place. (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif) Paul |
Tobra |
![]()
Post
#5
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,453 Joined: 22-August 05 From: Sacramento, CA Member No.: 4,634 ![]() |
Frugal, not cheap.
You keep valuables in your car? Right now, my tires are the most valuable thing in the vicinity of my car. |
Air_Cooled_Nut |
![]()
Post
#6
|
914 Ronin - 914 owner who lost his 914club.com ![]() ![]() ![]() Group: Members Posts: 1,748 Joined: 19-April 03 From: Beaverton, Oregon Member No.: 584 Region Association: None ![]() |
What do you do about securing the car (un/locking doors)? Guess you could use a remote entry system (and pray the battery never dies...).
|
Air_Cooled_Nut |
![]()
Post
#7
|
914 Ronin - 914 owner who lost his 914club.com ![]() ![]() ![]() Group: Members Posts: 1,748 Joined: 19-April 03 From: Beaverton, Oregon Member No.: 584 Region Association: None ![]() |
Oh, but neat idea! (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)
|
Rand |
![]()
Post
#8
|
Cross Member ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,411 Joined: 8-February 05 From: OR Member No.: 3,573 Region Association: None ![]() |
I don't miss the door locks. I have never locked the doors. I keep valuables locked in the trunk and have a hidden ignition cut off switch for theft protection. (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)
|
ClayPerrine |
![]()
Post
#9
|
Life's been good to me so far..... ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 16,316 Joined: 11-September 03 From: Hurst, TX. Member No.: 1,143 Region Association: NineFourteenerVille ![]() ![]() |
That looks really cool!!!!! (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)
|
horizontally-opposed |
![]()
Post
#10
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,456 Joined: 12-May 04 From: San Francisco Member No.: 2,058 Region Association: None ![]() ![]() |
This is an idea with some legs on it...
Nicely done! (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) pete |
firstknight13 |
![]()
Post
#11
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 652 Joined: 25-March 05 From: manchester,ct. Member No.: 3,817 ![]() |
great idea to bad VW oops i mean PORSCHE didn't think of it first (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
|
davep |
![]()
Post
#12
|
||
914 Historian ![]() ![]() ![]() ![]() ![]() Group: Benefactors Posts: 5,262 Joined: 13-October 03 From: Burford, ON, N0E 1A0 Member No.: 1,244 Region Association: Canada ![]() ![]() |
Idiot grandson did that to his Civic. Honda says you have to open the hood from inside the car. So if the cable breaks then you have to use a can-openner? I figure any self-respecting car jacker would take 15 seconds to get in. But I'm in no hurry to retrieve the car. |
||
mharrison |
![]()
Post
#13
|
Why do I bother???? ![]() ![]() ![]() Group: Members Posts: 633 Joined: 8-September 03 From: Madison, MS Member No.: 1,123 ![]() |
Typically a solenoid type keyless\handle-less entry system has a "Hidden" button for a manual release. Anyone who puts one of those on their car (Honda or whatever) should always incorporate this.
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 9th May 2025 - 10:54 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |