 Something new for my garage, and its on wheels |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| ChrisFoley |
 Nov 18 2005, 05:27 AM
Post
#1
|
|
I am Tangerine Racing  Group: Members Posts: 7,934 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None 
 |
I cooked this up at the shop last week. (IMG:http://www.914world.com/bbs2/html/emoticons/idea.gif)
My spare engine for the race car was just sitting on the floor of the truck, and I have several other engines laying about the garage that need to be more easily portable. I have a couple of small rectangular dollies but I wanted something purposebuilt with a lower center of gravity. My design supports the engine from the square bosses on the bottom of the heads, provides clearance for attached stub pipes and other peripheral hardware, and can have a piece of plywood under it to support the case as well if desired. (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif) Attached image(s) 
|
   |
 
|
| type47 |
Nov 18 2005, 06:51 AM
Post
#2
|
|
Viermeister Group: Members Posts: 4,254 Joined: 7-August 03 From: Vienna, VA Member No.: 994 Region Association: MidAtlantic Region |
(IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) dang! beats my furniture dolly! beautiful work. now stand by for the requests to buy one!
|
|
|
|
| URY914 |
Nov 18 2005, 07:12 AM
Post
#3
|
|
I built the lightest 914 in the history of mankind. Group: Members Posts: 121,070 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None |
Looks sweet. You better figure out a price and put in on your site. People will want them
I made a rolling engine rack that will hold three on top of each other. But it's ugly. Paul |
|
|
|
| TINCAN914 |
Nov 18 2005, 07:19 AM
Post
#4
|
|
Summer's Commin... Group: Members Posts: 2,440 Joined: 18-August 05 From: Colorado Springs, CO. Member No.: 4,611 Region Association: Rocky Mountains |
Nice work... Build it and they will come.. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
|
|
|
|
| jim_hoyland |
Nov 18 2005, 08:46 AM
Post
#5
|
|
Get that VIN ? Group: Members Posts: 9,319 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California
|
Verrrry nice !
|
|
|
|
| ChrisFoley |
Nov 18 2005, 08:47 AM
Post
#6
|
|
I am Tangerine Racing Group: Members Posts: 7,934 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None
|
I nailed down the design on the first one.
I bought two sets of casters at once so, the second one will be made to determine a suitable price. (IMG:http://www.914world.com/bbs2/html/emoticons/welder.gif) |
|
|
|
| nomore9one4 |
Nov 18 2005, 09:15 AM
Post
#7
|
|
Member of the Eastcoast Thread Killers Club Group: Members Posts: 2,666 Joined: 26-December 02 From: Pittsburgh,Pa.15237 Member No.: 14 Region Association: None |
Would work great to store wheels aswell! (IMG:http://www.914world.com/bbs2/html/emoticons/mueba.gif)
|
|
|
|
| r_towle |
Nov 18 2005, 09:19 AM
Post
#8
|
|
Custom Member Group: Members Posts: 24,588 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States
|
Chris,
I would prefer one at about the height of a milk crate... The famous crate is my normal stool to work on... I was thinking, adjust the valves, work on the motor...clean it etc... I have never tried one at that height (I am a dolly kida guy) so I dont know if it is good bad or what.... Just a thought... Rich |
|
|
|
| URY914 |
Nov 18 2005, 10:15 AM
Post
#9
|
|
I built the lightest 914 in the history of mankind. Group: Members Posts: 121,070 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None |
Chris,
Make it so the height is adjustable somehow. Or high enough to get a floor jack under it. (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif) Sorry, don't mean to pile on more with wild ass suggestions. Leave it as is. |
|
|
|
| ChrisFoley |
Nov 18 2005, 08:18 PM
Post
#10
|
||
|
I am Tangerine Racing Group: Members Posts: 7,934 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None
|
That's what I'um doin' (IMG:http://www.914world.com/bbs2/html/emoticons/cool_shades.gif) |
||
|
|
|
||
| jd74914 |
Nov 18 2005, 08:27 PM
Post
#11
|
|
Its alive Group: Members Posts: 4,782 Joined: 16-February 04 From: CT Member No.: 1,659 Region Association: North East States |
Sweet dolly (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)
I agree with Paul, there is definately a market for those. That one is really nice. |
|
|
|
| firstknight13 |
Nov 18 2005, 08:31 PM
Post
#12
|
|
Senior Member Group: Members Posts: 652 Joined: 25-March 05 From: manchester,ct. Member No.: 3,817 |
(IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) of course it doesn't surprise me chris YOU made it!!! NICE WORK!!!
|
|
|
|
| jimtab |
Nov 18 2005, 10:44 PM
Post
#13
|
||
|
Advanced Member Group: Members Posts: 3,477 Joined: 5-January 03 From: Pacifica, California Member No.: 91 Region Association: Northern California |
Oooooh, hydrolics/lift kit, bling 22s..... (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) |
||
|
|
|
||
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 01:55 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.