 Wanted: local D-Jet owner to test new product, trigger point replacement for upgrades |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| Mueller |
 Jan 16 2006, 03:04 PM
Post
#1
|
|
914 Freak!  Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None 
 |
Currently D-Jet owners are limited to using the stock distributor which besides being 30 years old, does not have an easy method of changing the timing curve for those that want to optimize thier ignition.
For those that have been on the board for a while, I made an optical circuit that fit inside an aftermarket Mallory billet distributor (I'm sure it's work just as well in a billet MSD distributor) Our (Fiid and I) new design has no moving parts, just 1 wire to the coil with the other 3 wires pluging into the factory engine harness to bypass the mechanical points inside the D-Jet distributor. Ideally for testing purposes keeping the stock distributor with the trigger points intact would be a good idea in case a problem did occur with the prototype unit and you could just unplug our modual and hookup the factory connectors easily. |
   |
 
|
| DanT |
Jan 16 2006, 03:10 PM
Post
#2
|
|
Going back to the Dark Side! Group: Members Posts: 4,300 Joined: 4-October 04 From: Auburn, CA Member No.: 2,880 Region Association: None |
Would my totally stock EFI and distributor in my 1974 2.0L Track/AX car work? (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)
|
|
|
|
| SLITS |
Jan 16 2006, 03:12 PM
Post
#3
|
|
"This Utah shit is HARSH!" Group: Benefactors Posts: 13,602 Joined: 22-February 04 From: SoCal Mountains ... Member No.: 1,696 Region Association: None  |
Ok
|
|
|
|
| Mueller |
Jan 16 2006, 03:23 PM
Post
#4
|
||
|
914 Freak! Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None
|
nada, no cost at all (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) depending on the year and model, I'll even give you an ECU to use if you are uneasy about using your own ECU..... |
||
|
|
|
||
| jimkelly |
Jan 16 2006, 05:44 PM
Post
#5
|
|
Delaware USA Group: Members Posts: 4,969 Joined: 5-August 04 From: Delaware, USA Member No.: 2,460 Region Association: MidAtlantic Region |
I'm ignorant : )
Are you looking for carbed engines or stock EFI engines? What is the model of the mallory distributor you are using? I assume there is a model for each engine size and year? Ballpark price for mallory distributor is? Ballpark price for your module will be? Thanks, Jim |
|
|
|
| Mueller |
Jan 16 2006, 05:55 PM
Post
#6
|
||
|
914 Freak! Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None
|
D-Jet equipped motor......carbs do not need a "trigger" for the injectors (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif) all of the /4's can use the same Mallory or MSD distributor....the advantage of a new distributor (besides it being new with 0 miles) is that the advance curve can be set up to better suit the engine $275 for the Mallory*, not sure how much the MSD is. we expect the module to be about $30 or less |
||
|
|
|
||
| DanT |
Jan 16 2006, 06:25 PM
Post
#7
|
|
Going back to the Dark Side! Group: Members Posts: 4,300 Joined: 4-October 04 From: Auburn, CA Member No.: 2,880 Region Association: None |
So what exactly would be involved with this testing? (IMG:http://www.914world.com/bbs2/html/emoticons/huh.gif)
How long would it last, and what could be expected? At the end of testing what happens to the test mule dizzy? (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif) |
|
|
|
| Mueller |
Jan 16 2006, 06:40 PM
Post
#8
|
||||||
|
914 Freak! Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None
|
unplug the 3 pin connector going to the stock distributor, plug the module into the engine harness and connect one wire to the - side of the coil
should last the life of the vehicle or even longer, it's just a bunch of discrete semiconductors and passive components thrown together in the correct orientation....for a stock distributor, I see no real improvment over a perfect set of mechanical points....if using an aftermarket distributor, this module is one of the only a few methods (both designed by me) for keeping the stock D-Jet fuel injection
well, this can be used with the stock distributor or an aftermarket distributor....for testing, no replacement distributor supplied by me (IMG:http://www.914world.com/bbs2/html/emoticons/smash.gif) for a stock distributor, about the only reason to use the new module is to eliminate the mechanical points which cost approx. $95 new. |
||||||
|
|
|
||||||
| DanT |
Jan 16 2006, 06:52 PM
Post
#9
|
|
Going back to the Dark Side! Group: Members Posts: 4,300 Joined: 4-October 04 From: Auburn, CA Member No.: 2,880 Region Association: None |
Mike,
As to "how long it will last" I was referring to the length of the testing period. Is this item something you plan on providing to members if it works according to plan? Will the "testor" be entitled to the first ones off the line when production commences? (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif) |
|
|
|
| Mueller |
Jan 16 2006, 06:59 PM
Post
#10
|
||
|
914 Freak! Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None
|
sorry...the test person will get to keep, sell or throw away the unit if they wish to (IMG:http://www.914world.com/bbs2/html/emoticons/sawzall-smiley.gif) yes, these will be available to members here as well as there might be a small market for the Mercedes and Volvo people as well as Type III guys I think ..... I don't see a huge market at all, but a few extra bucks for gas money would be nice...... gotta hit the road, feel free to call me on my cell if you want... 510.484.8700 Mike |
||
|
|
|
||
| DanT |
Jan 16 2006, 07:54 PM
Post
#11
|
|
Going back to the Dark Side! Group: Members Posts: 4,300 Joined: 4-October 04 From: Auburn, CA Member No.: 2,880 Region Association: None |
Thanks Mike,
I'LL give you a call in a day or two. Or drop me a PM (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif) |
|
|
|
| mikerose |
Jan 17 2006, 09:30 AM
Post
#12
|
|
Happy to be back Group: Members Posts: 657 Joined: 31-December 02 From: Pittsburg,ca Member No.: 60 Region Association: None |
(IMG:http://www.914world.com/bbs2/html/emoticons/cool_shades.gif) Hi Mike (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
(IMG:http://www.914world.com/bbs2/html/emoticons/cool_shades.gif) Need I say more........ |
|
|
|
| r_towle |
Jan 17 2006, 10:23 AM
Post
#13
|
|
Custom Member Group: Members Posts: 24,588 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States
|
If you need cold weather testing...let me know...
1.7, stock djet. Rich |
 |
|
| Mueller |
Jan 17 2006, 12:19 PM
Post
#14
|
||
|
914 Freak! Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None
|
and you are close enough to use my AAA, hahahhaha thanks all, we have a few brave souls lined up.....now to harrass Fiid and get him to finish abusing the module on the test bench |
||
|
|
|
||
| mikerose |
Jan 17 2006, 02:04 PM
Post
#15
|
|
Happy to be back Group: Members Posts: 657 Joined: 31-December 02 From: Pittsburg,ca Member No.: 60 Region Association: None |
Well hell if I need a car you have that old 911 I can use HaHahaaaaaa
Mike (IMG:http://www.914world.com/bbs2/html/emoticons/cool_shades.gif) |
|
|
|
| Howard |
Jan 17 2006, 05:34 PM
Post
#16
|
|
Incontin(g)ent Member Group: Benefactors Posts: 5,785 Joined: 24-July 03 From: Westlake Village, CA Member No.: 943 Region Association: None
 |
If I'm local enough, send me one. Stock 2.0 FI.
|
|
|
|
| Gint |
Jan 17 2006, 06:17 PM
Post
#17
|
|
Mike Ginter Group: Admin Posts: 16,083 Joined: 26-December 02 From: Denver CO. Member No.: 20 Region Association: Rocky Mountains |
I'm not local. (IMG:http://www.914world.com/bbs2/html/emoticons/wacko.gif) Thank god.
But if you need a mule... I've done 3 dizzy swaps today already. Trying to find one good unit to use as a spare so I can install a Pertronix (got it for free) in the dizzy that eats points rubbing blocks. Anywho... I'm tired of these old beater Bosch dizzys that we have to keep if'n we want to retain the D-Jet. I'm excited to see you guys get something going with this project. |
|
|
|
| redshift |
Jan 17 2006, 06:29 PM
Post
#18
|
|
Bless the Hell out of you! Group: Members Posts: 10,926 Joined: 29-June 03 Member No.: 869 |
Ok GOODY! Cause I want that DIZZY OUT OF THERE!
I want the Mallory, hurry up. If you have a second for testing, how much do you want for it? (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif) M |
|
|
|
| Jake Raby |
Jan 17 2006, 06:39 PM
Post
#19
|
|
Engine Surgeon Group: Members Posts: 9,394 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States |
Glad to hear this Mike...
I don't have a D Jet equipped car or engine or i would sure test it for you. I'll buy them from you, outfit Mallory's with them and offer them as a unit in the store- if that works for you. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 05:02 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.