 How much Curil K2 goop goes on case halves?, ...and a couple other questions... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| mike373 |
 Mar 30 2007, 02:21 PM
Post
#1
|
|
Member  Group: Members Posts: 198 Joined: 3-August 05 From: san diego, ca Member No.: 4,536  |
Ok.... getting to the stage of actually putting stuff back together. How much Curil goop goes on the case halves.... and what should it be applied with? Also.... What should I use to seal the threads on the cylinder studs when I put them back in?? I have Loctite 565 PST for the case plugs... is that the same as standard Loctite 565??? Or did I buy the wrong stuff?
Thanks, Mike |
   |
 
|
| blitZ |
Mar 30 2007, 03:22 PM
Post
#2
|
|
Beer please... Group: Members Posts: 2,223 Joined: 31-August 05 From: Lawrenceville, GA Member No.: 4,719 Region Association: South East States |
I put a pretty thick bead on both halves and spread it with my finger. I used Permatex thread sealer, IIRC, I think that is what Jake's video suggested.
|
|
|
|
| So.Cal.914 |
Mar 30 2007, 06:52 PM
Post
#3
|
|
"...And it has a front trunk too." Group: Members Posts: 6,588 Joined: 15-February 04 From: Low Desert, CA./ Hills of N.J. Member No.: 1,658 Region Association: None |
It depends on who you talk to, I clean the mateing surfaces where I would eat off
of them, then I apply a thin even coat of sealer on one side only. |
|
|
|
| Allan |
Mar 30 2007, 06:56 PM
Post
#4
|
|
Teenerless Weenie Group: Members Posts: 8,373 Joined: 5-July 04 From: Western Mesopotamia Member No.: 2,304 Region Association: Southern California |
I didn't even know about the Curil goop when I rebuilt my motor and used Permatex 3M.
Granted, this was the original Jake video but, it held well and the only leak I had after 1000 miles was the tranny... |
|
|
|
| Aaron Cox |
Mar 30 2007, 07:18 PM
Post
#5
|
|
Professional Lawn Dart Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California |
QUOTE(Headrage @ Mar 30 2007, 05:56 PM)  I didn't even know about the Curil goop when I rebuilt my motor and used Permatex 3M. Granted, this was the original Jake video but, it held well and the only leak I had after 1000 miles was the tranny... (IMG:style_emoticons/default/agree.gif) i used permatex 3h aviation sealant also... no leaks yet. 40k on the clock. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 05:58 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.