 Actually yanked out the lump last night, no mo four |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| woobn8r |
 Nov 7 2007, 02:16 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 607 Joined: 7-January 07 From: Newmarket, Ontario, Canada Member No.: 7,435 Region Association: None  |
I thought I'd tell somebody, as my wife couldn't care less....
I dropped the motor out of my '74 last night....no corroded bolts...actually most everything is covered in oil due to the POs engine rebuild and resulting leaks....many bolts on the tin and ancilleraries were missing also. Doors off, hood, trunk & engine lid...yup, bumpers gone, lights out, seats, carpet and annoying insulation gone...gas tank, fresh air system banished ...wiring has retreated from the front to the passenger cabin.... I think all I have to do is un-install the suspension, dash and glass and we are ready for some severe cleaning. Hey Chuck, I'm catching up! (IMG:style_emoticons/default/poke.gif) |
   |
 
|
| rmital |
Nov 7 2007, 02:31 PM
Post
#2
|
|
Northeast optimist Group: Members Posts: 1,947 Joined: 12-December 05 From: Park Ridge, NJ Member No.: 5,268 |
|
|
|
|
| mike_the_man |
Nov 7 2007, 03:42 PM
Post
#3
|
|
I like stuff! Group: Members Posts: 1,338 Joined: 11-June 03 From: Regina, Saskatchewan, Canada Member No.: 809 |
So what's the plan? Rebuilding the 4? V8?? Big six???
Good job on the engine drop! |
|
|
|
| Chuck |
Nov 7 2007, 04:15 PM
Post
#4
|
|
What it eventually will look like . . . . Group: Members Posts: 355 Joined: 29-March 07 From: Maple Grove, MN Member No.: 7,632 Region Association: Northstar Region |
QUOTE(woobn8r @ Nov 7 2007, 12:16 PM)  I thought I'd tell somebody, as my wife couldn't care less.... I dropped the motor out of my '74 last night....no corroded bolts...actually most everything is covered in oil due to the POs engine rebuild and resulting leaks....many bolts on the tin and ancilleraries were missing also. Doors off, hood, trunk & engine lid...yup, bumpers gone, lights out, seats, carpet and annoying insulation gone...gas tank, fresh air system banished ...wiring has retreated from the front to the passenger cabin.... I think all I have to do is un-install the suspension, dash and glass and we are ready for some severe cleaning. Hey Chuck, I'm catching up! (IMG:style_emoticons/default/poke.gif) Sounds like you're hot on my heels. (IMG:style_emoticons/default/biggrin.gif) Although, as I think about it, your 3.2 is in your garage and I won't have mine paid for and in the stable until after New Years. Plus, it sounds like your car needs less rustoration than mine does. Soooo, you may actually be ahead of me. Nice to hear the project is progressing. I've got a number of items on the honey-do list before the snow flies so I may not get much time on mine again for a few weeks. (IMG:style_emoticons/default/sad.gif) And I agree, we need pictures. |
|
|
|
| woobn8r |
Nov 7 2007, 05:41 PM
Post
#5
|
|
Senior Member Group: Members Posts: 607 Joined: 7-January 07 From: Newmarket, Ontario, Canada Member No.: 7,435 Region Association: None |
I'd love to post pictures if I was smart enough to learn how to resize them....
My 3.2 is totally built, but I had to take off the 911 tin and exhaust as It was built for my RS replicar....and now it's teener bound. I have collected...911 3.5" Bilsteins and the rest of the front end stuff, needle bearing suspension bushings, Boxter brake set up for f&r a la Rich Johnson, r hubs from a 911, Weltmeister front bar, a 915, AA flares to install, CF Getty lids on the way as we speak....still, so much to do...and to think about....still can't decide on a colour scheme. |
|
|
|
| balljoint |
Nov 7 2007, 06:09 PM
Post
#6
|
|
914 Wizard Group: Members Posts: 10,000 Joined: 6-April 04 Member No.: 1,897 Region Association: None |
QUOTE(woobn8r @ Nov 7 2007, 06:41 PM) I'd love to post pictures if I was smart enough to learn how to resize them.... Get at 'er. Resizing Images |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 06:28 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.