 paint-safe solvent/degreaser? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| smontanaro |
 Jun 29 2008, 10:04 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,190 Joined: 3-June 05 From: Evanston, IL Member No.: 4,197 Region Association: Upper MidWest  |
A previous owner coated much of the front trunk of my teener with what appears to be some sort of black undercoating. I originally thought it was POR-15 and was just going to leave it alone, but then noticed that it is soft and can be scraped off with my fingernail (not easily, but it's pretty soft). The paint underneath that I've exposed so far looks fine, so I'd like to get this crud off without doing any/too much damage to the paint.
While at the local PCA concours a couple weeks ago one of the other guys said to get Wurth citrus degreaser. I've seen a couple slightly different products online, one says "Wurth Red Line", the other just says "Wurth". Also, they seem to only come in rattle can form and don't say anything about being safe for painted surfaces. I was hoping for something I could brush on. Any experience with this product or any other "environmentally friendly" degreaser? Thx, Skip Montanaro |
   |
 
|
| r_towle |
Jun 29 2008, 11:48 AM
Post
#2
|
|
Custom Member Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
|
Kerosene.
ITs probably zbart rust proofing...it never hardens.. Rich |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 10:32 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.