Brake Caliper Question, Why two? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Brake Caliper Question, Why two? |
LotusJoe |
Mar 18 2010, 09:04 PM
Post
#1
|
Europa Twink Driver Group: Members Posts: 406 Joined: 30-November 09 From: Southern California Member No.: 11,085 Region Association: Southern California |
Why do my brake calipers have two bleed screws? (IMG:style_emoticons/default/huh.gif)
|
zambezi |
Mar 19 2010, 01:02 AM
Post
#2
|
Senior Member Group: Members Posts: 711 Joined: 14-April 08 From: Lafayette, LA Member No.: 8,920 Region Association: South East States |
So the same part number can be used on either side of the car. Other wise the manufacturer would have to make a specific right and left caliper so the bleed screw could be to the top. |
Eric_Shea |
Mar 19 2010, 09:27 AM
Post
#3
|
PMB Performance Group: Admin Posts: 19,278 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains |
They used them on different cars (rears applicable). The fronts are a VW caliper made en-mass.
The rears are not interchangable left or right however, there was a Fiat model that mounted them the other way (very similar to the way the Ferrari used the same caliper as the 914-6, just mounted upside down with the bleeder at the other end). Alfa mounted a similar version of our rears at the top and on the transmission... those had bleeders on the top. The fronts, while listed as interchangable (and I see no reason why you can't), are directional in the sense that one of the bleeders rests deeper in a rounded recess area. I always load the pistons so this bleeder is on top. |
LotusJoe |
Mar 19 2010, 09:34 AM
Post
#4
|
Europa Twink Driver Group: Members Posts: 406 Joined: 30-November 09 From: Southern California Member No.: 11,085 Region Association: Southern California |
They used them on different cars (rears applicable). The fronts are a VW caliper made en-mass. The rears are not interchangable left or right however, there was a Fiat model that mounted them the other way (very similar to the way the Ferrari used the same caliper as the 914-6, just mounted upside down with the bleeder at the other end). Alfa mounted a similar version of our rears at the top and on the transmission... those had bleeders on the top. The fronts, while listed as interchangable (and I see no reason why you can't), are directional in the sense that one of the bleeders rests deeper in a rounded recess area. I always load the pistons so this bleeder is on top. So does that mean I can plug the the lower bleeder? |
Eric_Shea |
Mar 19 2010, 09:36 AM
Post
#5
|
PMB Performance Group: Admin Posts: 19,278 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains |
If you want to.
|
Lo-Fi Version | Time is now: 7th June 2024 - 11:36 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |