 Wiper Delay question:, Installed Jeff's harnes and followed Andy's instructions: |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Root_Werks |
 May 17 2010, 09:26 AM
Post
#1
|
|
Village Idiot  Group: Members Posts: 8,668 Joined: 25-May 04 From: About 5NM from Canada Member No.: 2,105 Region Association: Pacific Northwest 
 |
Everything hooked up, I get the 3-wipes when the squirter is actuated, but no delay action when the wiper arm is moved "down".
It could be a bad relay? I did: Red/blk on the motor blue to green (Switch to relay) Grn from relay to motor (From the removed green now hooked to blue on relay) Brn to ground on motor Brown from switch to relay (this works fine). Did I miss something? (IMG:style_emoticons/default/confused24.gif) |
   |
 
|
  |
Replies(1 - 3)
| r_towle |
May 17 2010, 09:35 AM
Post
#2
|
|
Custom Member Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States
|
Turn key on.
Put wiper lever into delay position. Check all the wires going to the relay for 12vdc. Rich |
 |
|
| jim_hoyland |
May 17 2010, 10:08 AM
Post
#3
|
|
Get that VIN ? Group: Members Posts: 9,696 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California
|
Did you break-off the tab that allows the selector into the delay position ? You end up with: Off, Low, Fast, and Delay
|
|
|
|
| Root_Werks |
May 17 2010, 11:11 AM
Post
#4
|
|
Village Idiot Group: Members Posts: 8,668 Joined: 25-May 04 From: About 5NM from Canada Member No.: 2,105 Region Association: Pacific Northwest
|
QUOTE(jim_hoyland @ May 17 2010, 09:08 AM)  Did you break-off the tab that allows the selector into the delay position ? You end up with: Off, Low, Fast, and Delay Yup, broke off the tab. Hmm, Rich brings up an interesting point. I didn't really fiddle with things all that much. I did get power to the red/blk wire up to the relay, but didn't think to check the new blue wire. I should also check ground, should be good, but you never know. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 02:46 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.