Brake Caliper re-build question, Brake Caliper rebuild |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Brake Caliper re-build question, Brake Caliper rebuild |
LotusJoe |
Jun 7 2010, 07:28 PM
Post
#1
|
Europa Twink Driver Group: Members Posts: 406 Joined: 30-November 09 From: Southern California Member No.: 11,085 Region Association: Southern California |
I'm in the process of rebuilding all four brake calipers and am contemplating having them cadmium plated. Does anyone know if the plating process will require that the bores be re-polished. I'm thinking that since the o-ring sits in the caliper and if the piston is smooth with no pitting; that as long as the bore is clean and free of any gouges that the plating process will have little effect.
Any thoughts or experience is appreciated. Thanks |
underthetire |
Jun 7 2010, 07:33 PM
Post
#2
|
914 Guru Group: Members Posts: 5,062 Joined: 7-October 08 From: Brentwood Member No.: 9,623 Region Association: Northern California |
This guy would know for sure
http://www.pmbperformance.com/catalog/item...552/4782980.htm |
drgchapman |
Jun 7 2010, 07:50 PM
Post
#3
|
Current Stable Group: NoClassifiedAccess Posts: 922 Joined: 20-September 04 From: Portland, OR Member No.: 2,789 Region Association: Pacific Northwest |
Eric will chime in shortly.......
|
underthetire |
Jun 7 2010, 07:51 PM
Post
#4
|
914 Guru Group: Members Posts: 5,062 Joined: 7-October 08 From: Brentwood Member No.: 9,623 Region Association: Northern California |
I hope so. Can't use his checkout thingy on the web site.
|
jmill |
Jun 7 2010, 08:45 PM
Post
#5
|
Green Hornet Group: Members Posts: 2,449 Joined: 9-May 08 From: Racine, Wisconsin Member No.: 9,038 Region Association: Upper MidWest |
You'll most likely get them zinc plated. Not too many places do cad plating anymore.
|
McMark |
Jun 7 2010, 11:28 PM
Post
#6
|
914 Freak! Group: Retired Admin Posts: 20,179 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None |
I can see Eric is typing right now. But I learned at the last WCR that zinc is OE. (IMG:style_emoticons/default/cool.gif)
|
Eric_Shea |
Jun 7 2010, 11:29 PM
Post
#7
|
PMB Performance Group: Admin Posts: 19,279 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains |
The good news is, ATE zinc plated them... not CAD.
The better news is, you won't need to hone them once they're plated. the bores should come back smooth and clean. What's wrong with the checkout thingy? |
underthetire |
Jun 7 2010, 11:41 PM
Post
#8
|
914 Guru Group: Members Posts: 5,062 Joined: 7-October 08 From: Brentwood Member No.: 9,623 Region Association: Northern California |
Kept waiting for some secure check out. Ill call you tomorrow.
|
Eric_Shea |
Jun 8 2010, 09:39 AM
Post
#9
|
PMB Performance Group: Admin Posts: 19,279 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains |
We use "authorize.net"
Fairly standard for secure checkout. Is it hanging? I tried a test order and everthing was fine. |
tradisrad |
Jun 8 2010, 09:49 AM
Post
#10
|
Senior Member Group: Members Posts: 985 Joined: 11-September 06 From: San Mateo, CA Member No.: 6,815 Region Association: Northern California |
i painted mine and while they look good I wish I had them zinc plated....
|
underthetire |
Jun 8 2010, 10:02 AM
Post
#11
|
914 Guru Group: Members Posts: 5,062 Joined: 7-October 08 From: Brentwood Member No.: 9,623 Region Association: Northern California |
I just bought a rebuilt zinc plated one at the swap meet I have to paint.. (IMG:style_emoticons/default/barf.gif)
|
underthetire |
Jun 8 2010, 10:08 AM
Post
#12
|
914 Guru Group: Members Posts: 5,062 Joined: 7-October 08 From: Brentwood Member No.: 9,623 Region Association: Northern California |
We use "authorize.net" Fairly standard for secure checkout. Is it hanging? I tried a test order and everthing was fine. Worked today. Not yesterday. Now go get my lines (IMG:style_emoticons/default/slap.gif) |
LotusJoe |
Jun 8 2010, 07:18 PM
Post
#13
|
Europa Twink Driver Group: Members Posts: 406 Joined: 30-November 09 From: Southern California Member No.: 11,085 Region Association: Southern California |
Thanks for the info guys. Will let you know how it turns out.
|
Lo-Fi Version | Time is now: 17th June 2024 - 10:55 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |