Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Volvo torque specs needed
scotty b
post Sep 12 2010, 02:14 PM
Post #1


rust free you say ?
***************

Group: Members
Posts: 16,375
Joined: 7-January 05
From: richmond, Va.
Member No.: 3,419
Region Association: None



I'm hoping someone here ( maybe the Crustastious one ) has the torque specs for a 99 Volvo S80 T-6 cam housing bolts. I have the head specs and it is done, but I have searched all over creation and can't find any info on the cam housing torque. I even bought a manual from Europe, downloaded it and can't get it to open. Anyone ???? (IMG:style_emoticons/default/confused24.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies(1 - 3)
kkid
post Sep 12 2010, 02:39 PM
Post #2


Member
**

Group: Members
Posts: 343
Joined: 18-December 07
From: Oakland, CA
Member No.: 8,483
Region Association: Northern California



wonder if this chart would help.

http://www.imperialinc.com/pdf/A_FastenerTorqueCharts.pdf

or send us the file so we can try open it?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
anderssj
post Sep 12 2010, 08:56 PM
Post #3


Dog is my copilot...
***

Group: Members
Posts: 1,700
Joined: 28-January 03
From: VA
Member No.: 207
Region Association: MidAtlantic Region



Is this for a B6284T (twin turbo)?

I checked the VADIS software for the 1999 B6284T--it explains how, but no torque values (IMG:style_emoticons/default/blink.gif)

I also checked the torque table, and no listing for the cam housing bolts. I know the guys at the local dealership real well--I'll check with them tomorrow.

Let me know if it's different engine.

Best,

Steve A-

If the software you ordered was the VADIS stuff, I may have additional instructions here somewhere. If I find them I'll PM you.
User is online!Profile CardPM
Go to the top of the page
+Quote Post
anderssj
post Sep 13 2010, 12:48 PM
Post #4


Dog is my copilot...
***

Group: Members
Posts: 1,700
Joined: 28-January 03
From: VA
Member No.: 207
Region Association: MidAtlantic Region



OK, I went to the shop at Wynne Volvo over lunch--we checked both their quick reference specification book and their on-line system VADI (?) and we couldn't find a specific reference for torque values for the 1999 s80 cam cover/housing. We also looked at the specs for other vehicles using that same basic engine (XC90, others) and got the same result: nada. (IMG:style_emoticons/default/blink.gif)

I talked to their lead technician (certified Volvo master tech) and he thought the cam cover was held in place with "around 40" M7 bolts and that they should be tightened to 17NM (about 12.5 foot-lbs). This figure fits with Volvo's rule of thumb for torquing an M7 bolt (grade 8.8).

FWIW, their spec on an M6 bolt is 10NM; M8 is tightened to 24NM.

Sorry I couldn't find anything definite.

Steve A-
User is online!Profile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 31st October 2024 - 05:35 PM