Timing problems, Advancing too soon? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Timing problems, Advancing too soon? |
Bartlett 914 |
Aug 3 2011, 03:24 PM
Post
#1
|
Advanced Member Group: Members Posts: 2,216 Joined: 30-August 05 From: South Elgin IL Member No.: 4,707 Region Association: Upper MidWest |
I have 2 distributors. A 250 and a 205A. Both are giving me issues. I am trying to adjust my timing and either the range of the advance is too small or I am advancing too fast. It seems I am fully advanced at about 2600 rpm. I should be at 3500 rpm. Is the maximum advance at 3500? Should there be some range beyond 3500? I have looked to see if something is stopping the advance plate and I don't see anything. This leaves the vacuum canister as a little suspect. I do have it disconnected. I am also using a Hot Spark igniter. Anyone see this before?
Car is a 2.0 D-jet configured for a 74 |
Dave_Darling |
Aug 3 2011, 04:40 PM
Post
#2
|
914 Idiot Group: Members Posts: 14,991 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California |
Max centrifugal advance should be in the ~2800-3000 RPM range for 2.0s, depending on the distributor. Setting the timing at 3500 is just to make certain that the advance is all in.
The factory manuals (there should be a PDF around somewhere!) have graphs for several of the stock distributors, they basically look like two straight lines. Summary of the info from the graphs (and from tables also in the manual) : http://web.archive.org/web/20030803223329/...ch/distrib.html --DD |
Bartlett 914 |
Aug 3 2011, 04:57 PM
Post
#3
|
Advanced Member Group: Members Posts: 2,216 Joined: 30-August 05 From: South Elgin IL Member No.: 4,707 Region Association: Upper MidWest |
Max centrifugal advance should be in the ~2800-3000 RPM range for 2.0s, depending on the distributor. Setting the timing at 3500 is just to make certain that the advance is all in. The factory manuals (there should be a PDF around somewhere!) have graphs for several of the stock distributors, they basically look like two straight lines. Summary of the info from the graphs (and from tables also in the manual) : http://web.archive.org/web/20030803223329/...ch/distrib.html --DD Hi Dave Thanks for the information. It looks like I have one bad distributor. I have one that is at full advance a little early but not as bad as the other one. Mark |
Lo-Fi Version | Time is now: 31st May 2024 - 10:22 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |