![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
mepstein |
![]()
Post
#1
|
914-6 GT in waiting ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,876 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region ![]() ![]() |
The door of the glove box will only open half way. Could the top dash pad have been replaced at one time with a later year one and cause this?
|
![]() ![]() |
Lennies914 |
![]()
Post
#2
|
Slacker ![]() ![]() ![]() Group: Members Posts: 828 Joined: 9-January 10 From: NorCal Member No.: 11,216 Region Association: Northern California ![]() ![]() |
Late dash top will not work on a early car. I'm guessing you have an early car.
|
mepstein |
![]()
Post
#3
|
914-6 GT in waiting ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,876 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region ![]() ![]() |
|
rhodyguy |
![]()
Post
#4
|
Chimp Sanctuary NW. Check it out. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 22,240 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch ![]() |
other than the glove door issue, which i can live with, how do the outside corners match up to the early knee (lower) bolster? the dash in the 70' is spent. i have a nice dash from the 75' i would like to use in the 70'. can you post a picture or 2 of how the later dash looks in your early car? mostly the outside corners.
k |
SLITS |
![]()
Post
#5
|
"This Utah shit is HARSH!" ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Benefactors Posts: 13,602 Joined: 22-February 04 From: SoCal Mountains ... Member No.: 1,696 Region Association: None ![]() ![]() |
Three things
1.) If the cardboard insert is not positioned properly, the glove box door will not open (and there are a couple of sizes). Top of door catches the insert top if it's hanging down at all. 2.) A late knee-knocker will not fit the early car due to the fresh air vents in the end of the late style. 3.) Early ash tray vs late ash tray mount in dash top is in a slightly different position. Tada! |
rhodyguy |
![]()
Post
#6
|
Chimp Sanctuary NW. Check it out. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 22,240 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch ![]() |
how about late dash top and early knee knocker? as hard as a good late style dash is hard to find the early one must be near impossible.
k |
CrashDown |
![]()
Post
#7
|
Fake Carbon Fiber MASTA! ![]() ![]() Group: Members Posts: 159 Joined: 8-June 09 From: Union City, CA Member No.: 10,453 Region Association: Northern California ![]() |
how about late dash top and early knee knocker? as hard as a good late style dash is hard to find the early one must be near impossible. k They are near impossible..... That's why I have 3. I had the same issue with the glove box door. It's the cardboard glovebox form not seated all the way against the dash face. Get behing it, wiggle it and it should seat completely. Then the glovebox door should work fine. |
mepstein |
![]()
Post
#8
|
914-6 GT in waiting ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,876 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region ![]() ![]() |
how about late dash top and early knee knocker? as hard as a good late style dash is hard to find the early one must be near impossible. k They are near impossible..... That's why I have 3. I had the same issue with the glove box door. It's the cardboard glovebox form not seated all the way against the dash face. Get behing it, wiggle it and it should seat completely. Then the glovebox door should work fine. You were right. Glove box was slightly warped and caused lid to hang up. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 9th May 2025 - 02:37 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |