![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
pbob42 |
![]()
Post
#1
|
Newbie ![]() Group: Members Posts: 46 Joined: 6-June 12 From: san diego Member No.: 14,531 Region Association: None ![]() |
Being a newbe is such a pain. Figured out I have the oddball temp sensor with the resistor on top.
Found it toward the back of the passenger side head near cycl 3. What a pain of a location. The wire is busted off. My question is, "how do you get this out?" and "when you get it out how do you get it back in?" |
![]() ![]() |
JeffBowlsby |
![]()
Post
#2
|
914 Wiring Harnesses ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,549 Joined: 7-January 03 From: San Ramon CA Member No.: 104 Region Association: None ![]() ![]() |
Got a photo of what you have?
|
TheCabinetmaker |
![]()
Post
#3
|
I drive my car everyday ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,304 Joined: 8-May 03 From: Tulsa, Ok. Member No.: 666 ![]() |
13mm deep socket. Run the wire thru the socket, then insert an extension with one corner ground off for the wire to pass by.
|
pbob42 |
![]()
Post
#4
|
Newbie ![]() Group: Members Posts: 46 Joined: 6-June 12 From: san diego Member No.: 14,531 Region Association: None ![]() |
|
pbob42 |
![]()
Post
#5
|
Newbie ![]() Group: Members Posts: 46 Joined: 6-June 12 From: san diego Member No.: 14,531 Region Association: None ![]() |
13mm deep socket. Run the wire thru the socket, then insert an extension with one corner ground off for the wire to pass by. Got it out - what a chore - where do I send Christmas cards to the designer of this? Thanks for the heads up. Where can I get one of these? |
pbob42 |
![]()
Post
#6
|
Newbie ![]() Group: Members Posts: 46 Joined: 6-June 12 From: san diego Member No.: 14,531 Region Association: None ![]() |
13mm deep socket. Run the wire thru the socket, then insert an extension with one corner ground off for the wire to pass by. Got it out - what a chore - where do I send Christmas cards to the designer of this? Thanks for the heads up. Where can I get one of these? Anders says the 1.7 sensor or the 2.0 sensor from others years will work. Is this correct? |
pbob42 |
![]()
Post
#7
|
Newbie ![]() Group: Members Posts: 46 Joined: 6-June 12 From: san diego Member No.: 14,531 Region Association: None ![]() |
OK - figured it out - use the 1.7 L cht from '73 and throw in a 270 ohm balast resistor.
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 17th June 2024 - 02:33 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |