![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
wes |
![]()
Post
#1
|
wes ![]() ![]() ![]() Group: Members Posts: 1,591 Joined: 8-December 07 From: Ukiah Ca Member No.: 8,436 Region Association: Northern California ![]() ![]() |
Ok my 914 has been painted and needs to have the new engine w/carb and trany put in but would like to go through the trany as long as its out. so who is the best around the San Francisco bay area to do this the new engine has been bumped up in power and also wondering is any need to adjust gearing on this trany considering the new engine for spirited street driving?
|
![]() ![]() |
SirAndy |
![]()
Post
#2
|
Resident German ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 42,257 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California ![]() |
Ok my 914 has been painted and needs to have the new engine w/carb and trany put in but would like to go through the trany as long as its out. so who is the best around the San Francisco bay area to do this the new engine has been bumped up in power and also wondering is any need to adjust gearing on this trany considering the new engine for spirited street driving? McMark in Sonoma ... http://www.originalcustoms.com/ (IMG:style_emoticons/default/driving.gif) |
wes |
![]()
Post
#3
|
wes ![]() ![]() ![]() Group: Members Posts: 1,591 Joined: 8-December 07 From: Ukiah Ca Member No.: 8,436 Region Association: Northern California ![]() ![]() |
thats what I thought thanks!
|
bfrymire |
![]()
Post
#4
|
Salsaholic ![]() ![]() ![]() Group: Members Posts: 590 Joined: 1-August 04 From: Sunnyvale, CA Member No.: 2,431 Region Association: Northern California ![]() |
Ok my 914 has been painted and needs to have the new engine w/carb and trany put in but would like to go through the trany as long as its out. so who is the best around the San Francisco bay area to do this the new engine has been bumped up in power and also wondering is any need to adjust gearing on this trany considering the new engine for spirited street driving? McMark in Sonoma ... http://www.originalcustoms.com/ (IMG:style_emoticons/default/driving.gif) +1 I had mine done there. --brett |
ConeDodger |
![]()
Post
#5
|
Apex killer! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 24,098 Joined: 31-December 04 From: Tahoe Area Member No.: 3,380 Region Association: Northern California ![]() ![]() |
Mc (IMG:style_emoticons/default/agree.gif) Mark
|
Dr Evil |
![]()
Post
#6
|
Send me your transmission! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 23,041 Joined: 21-November 03 From: Loveland, OH 45140 Member No.: 1,372 Region Association: MidAtlantic Region ![]() ![]() |
I hear he doesnt bathe (IMG:style_emoticons/default/confused24.gif)
(IMG:style_emoticons/default/wink.gif) |
Mike Bellis |
![]()
Post
#7
|
Resident Electrician ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,347 Joined: 22-June 09 From: Midlothian TX Member No.: 10,496 Region Association: None ![]() ![]() ![]() |
I hear he doesnt bathe (IMG:style_emoticons/default/confused24.gif) (IMG:style_emoticons/default/wink.gif) That's OK, the tranny is already dirty... (IMG:style_emoticons/default/biggrin.gif) |
bluhun |
![]()
Post
#8
|
Member ![]() ![]() Group: Members Posts: 91 Joined: 23-January 06 From: San Rafael, CA Member No.: 5,464 Region Association: Northern California ![]() |
Ok my 914 has been painted and needs to have the new engine w/carb and trany put in but would like to go through the trany as long as its out. so who is the best around the San Francisco bay area to do this the new engine has been bumped up in power and also wondering is any need to adjust gearing on this trany considering the new engine for spirited street driving? You might also check with Hi-Tec Auto in San Rafael. Dana did my transmission rebuild, complete with new billet aluminum intermediate plate and new California Motorsport billet bearing retainer. He has lots of experience with 901s and 915s. |
ww914 |
![]()
Post
#9
|
914 Convert ![]() ![]() Group: Members Posts: 435 Joined: 29-September 11 From: Central Coast, CA Member No.: 13,621 Region Association: Central California ![]() |
Ok my 914 has been painted and needs to have the new engine w/carb and trany put in but would like to go through the trany as long as its out. so who is the best around the San Francisco bay area to do this the new engine has been bumped up in power and also wondering is any need to adjust gearing on this trany considering the new engine for spirited street driving? McMark in Sonoma ... http://www.originalcustoms.com/ (IMG:style_emoticons/default/driving.gif) +1 I had mine done there. --brett Mine too. Works great. |
Elliot Cannon |
![]()
Post
#10
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Retired Members Posts: 8,487 Joined: 29-December 06 From: Paso Robles Ca. (Central coast) Member No.: 7,407 Region Association: None ![]() ![]() ![]() |
It's rumored, he can access hard to reach parts with telekineses. I have personally seen him change the oil pump on a 914 with the engine still in the car while explaining how a change in ocean water temp. affects the weather. (IMG:style_emoticons/default/laugh.gif)
|
SirAndy |
![]()
Post
#11
|
Resident German ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 42,257 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California ![]() |
You might also check with Hi-Tec Auto in San Rafael. Dana did my transmission rebuild, complete with new billet aluminum intermediate plate and new California Motorsport billet bearing retainer. He has lots of experience with 901s and 915s. Funny that you mention them. That's where i bought my car back in 2000, the PO had traded it in for another car. It sat outside with the windows down and had a few inches of water in it. The tired old 1.8L actually started right up but ran pretty rough. Came back the next day with cash in my hand and took her home ... (IMG:style_emoticons/default/wub.gif) |
Drums66 |
![]()
Post
#12
|
914 Rudiments ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,321 Joined: 15-January 03 From: Coronado,Cali Member No.: 151 Region Association: Southwest Region ![]() |
....also have heard good things about the trans work of "THOMAS"
also on this board (IMG:style_emoticons/default/idea.gif) (IMG:style_emoticons/default/bye1.gif) (IMG:style_emoticons/default/popcorn[1].gif) |
Elliot Cannon |
![]()
Post
#13
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Retired Members Posts: 8,487 Joined: 29-December 06 From: Paso Robles Ca. (Central coast) Member No.: 7,407 Region Association: None ![]() ![]() ![]() |
....also have heard good things about the trans work of "THOMAS" also on this board (IMG:style_emoticons/default/idea.gif) (IMG:style_emoticons/default/bye1.gif) (IMG:style_emoticons/default/popcorn[1].gif) THOMAS unfortunately moved back to Germany. |
McMark |
![]()
Post
#14
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 20,180 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None ![]() |
It's rumored, he can access hard to reach parts with telekineses. I have personally seen him change the oil pump on a 914 with the engine still in the car while explaining how a change in ocean water temp. affects the weather. (IMG:style_emoticons/default/laugh.gif) I hope you remembered everything I taught you that day. I don't do four things at once for fun! (IMG:style_emoticons/default/av-943.gif) |
Dave_Darling |
![]()
Post
#15
|
914 Idiot ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 15,200 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California ![]() ![]() |
It's rumored, he can access hard to reach parts with telekineses. ...All we know is... He's called McStig! (IMG:style_emoticons/default/happy11.gif) --DD |
ConeDodger |
![]()
Post
#16
|
Apex killer! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 24,098 Joined: 31-December 04 From: Tahoe Area Member No.: 3,380 Region Association: Northern California ![]() ![]() |
It's rumored, he can access hard to reach parts with telekineses. I have personally seen him change the oil pump on a 914 with the engine still in the car while explaining how a change in ocean water temp. affects the weather. (IMG:style_emoticons/default/laugh.gif) I hope you remembered everything I taught you that day. I don't do four things at once for fun! (IMG:style_emoticons/default/av-943.gif) He forgot to mention the engine was running and McMark didn't spill a drop... (IMG:style_emoticons/default/evilgrin.gif) |
wes |
![]()
Post
#17
|
wes ![]() ![]() ![]() Group: Members Posts: 1,591 Joined: 8-December 07 From: Ukiah Ca Member No.: 8,436 Region Association: Northern California ![]() ![]() |
so Mark how about we talk!
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 11th July 2025 - 04:46 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |