![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
flipb |
![]()
Post
#1
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,810 Joined: 2-September 09 From: Fairfax, VA Member No.: 10,752 Region Association: MidAtlantic Region ![]() ![]() |
I bought my '74 2.0 about four years ago, and I've had a great time with it. It's mostly very original, except:
For the past couple years, there's been a bad sound from the bottom end. Not loud, but noticeable to anyone who knows what they're listening for. (I was not among that group until I had a couple people point it out to me.) Lately, it's been losing more oil -- and it seems to be losing more than what I see dripping on the ground. I'm getting compression/leakdown tested next week, even though I'm pretty sure I know what it'll say. So I'm stuck with a tough decision:
OTOH, it might be cheaper in the short term to find another engine. Do I split up the numbers-matching engine from the car? Or try to keep it and buy a spare? I'd love to do some driving this summer/fall, but... ...I haven't budgeted for any of this. I can afford to put some money into it (although I'll be dipping deep into the spousal goodwill intangible fund). I've got a week to decide what to do. Appreciate your input. Am I overblowing the originality factor? Is $5K better spent on a rebuild, or a replacement/upgrade? Is $5K even the right ballpark for either of those options? Help me get from (IMG:style_emoticons/default/sad2.gif) back to (IMG:style_emoticons/default/driving.gif) without breaking the bank... |
![]() ![]() |
SirAndy |
![]()
Post
#2
|
Resident German ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 42,206 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California ![]() |
Is $5K better spent on a rebuild, or a replacement/upgrade? Is $5K even the right ballpark for either of those options? I don't know if McMark still does the $5k engine program (PM him!), but i think for that money you could do a really nice rebuild to 2056cc using your original case and get a very nice motor that will last you many, many years. (IMG:style_emoticons/default/driving.gif) |
JawjaPorsche |
![]()
Post
#3
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,463 Joined: 23-July 11 From: Clayton, Georgia Member No.: 13,351 Region Association: South East States ![]() |
Don't know if this is an option. But I am putting it out there.
Rebuilt Motors http://www.importmotor.com/Store/DeptSelec...mp;DealerId=108 Good Luck. |
damesandhotrods |
![]()
Post
#4
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 568 Joined: 26-September 10 From: Santa Cruz California Member No.: 12,218 Region Association: Northern California ![]() |
I am perfectly happy driving it in stock form.
If this is the case, you’re happy with it, why are you worrying about this? Rebuild the engine -- this leads to a bunch of other choices... carbs/EFI/heads/etc. Why not decide if you want to keep the carbs or return it to fuel injection and rebuild what you have? |
billh1963 |
![]()
Post
#5
|
Car Hoarder! ![]() ![]() ![]() ![]() Group: Members Posts: 3,408 Joined: 28-March 11 From: North Carolina Member No.: 12,871 Region Association: South East States ![]() |
Parking a car is silly....and on a 914 typically leads to a rusted pile of crap.
If keeping the original engine is important to you then buy another 2.0 off this forum or elsewhere and keep driving. My 73 has 2056 from a forum member and I love the way it drives! |
Mblizzard |
![]()
Post
#6
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States ![]() |
You can also check with McMark about doing a short block. His quote to me was very reasonable. Never park a 914. Mine is making a similar bad noise but I am going to drive it until I can save the money for the short block.
|
JeffBowlsby |
![]()
Post
#7
|
914 Wiring Harnesses & Beekeeper ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,907 Joined: 7-January 03 From: San Ramon CA Member No.: 104 Region Association: None ![]() ![]() |
The answer is always simple and direct. Its should be the code of all 914 owners.
Do what is in the best interests of the 914. |
carr914 |
![]()
Post
#8
|
Racer from Birth ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 124,877 Joined: 2-February 04 From: Tampa,FL Member No.: 1,623 Region Association: South East States ![]() ![]() |
|
DBCooper |
![]()
Post
#9
|
14's in the 13's with ATTITUDE ![]() ![]() ![]() ![]() Group: Members Posts: 3,079 Joined: 25-August 04 From: Dazed and Confused Member No.: 2,618 Region Association: Northern California ![]() |
Best interest is definitely not to park it, may as well sell it to Pick n Pull right now.
Nor to sell in, the worst possible return is selling a non-running or almost non-running car. So it's either rebuild what you have or replace it with a used engine. If you can get a cheap good used engine, that's fine, just put your original engine in a corner for contingencies. But the only way you can KNOW that used engine is good if if you know the seller, and no guarantee even then. You wouldn't be asking these questions if you could rebuild it yourself, so as far as I can see the only legitimate choice you have is to have a known legitimate shop rebuild the long block. In other words McMark or someone more local who's equally reputable. No big deal, no drama, just what happens to cars after thirty or so years, they need some maintenance. So do it and be done with it. |
flipb |
![]()
Post
#10
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,810 Joined: 2-September 09 From: Fairfax, VA Member No.: 10,752 Region Association: MidAtlantic Region ![]() ![]() |
Appreciate all the feedback. I'm definitely leaning toward a rebuild of the original 2.0.
My biggest question right now is this: Given my car -- especially those of you who've seen it in person -- how important is originality? Should I have any second thoughts about building it into a 2056 or similar? While I'm very happy driving it stock, a couple dozen more HP certainly wouldn't hurt. (IMG:style_emoticons/default/smile.gif) Edit: And if I'm placing entirely too much emphasis on originality, should I ship away my core and drop in a 2270? |
Mblizzard |
![]()
Post
#11
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States ![]() |
Well for me originality has its place. If you are intent on preserving as much as the car as possible the don't swap the engine as a core. Or better yet, buy a solid performance enhanced motor and put the 2 on the shelf until you decide which way you want to go. Even if you do decide to sell, having the original engine with the car is a plus even if it is not perfect.
|
billh1963 |
![]()
Post
#12
|
Car Hoarder! ![]() ![]() ![]() ![]() Group: Members Posts: 3,408 Joined: 28-March 11 From: North Carolina Member No.: 12,871 Region Association: South East States ![]() |
Your car does not have original paint nor does it still have the original fuel injection system. Quit worrying about it.
Keep the original engine in case you ever want to restore it, buy a good used engine or have one built, and drive the car! |
mepstein |
![]()
Post
#13
|
914-6 GT in waiting ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,876 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region ![]() ![]() |
Don't worry about originality. Put in a running engine and drive the car.
|
bembry |
![]()
Post
#14
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 529 Joined: 29-July 05 From: Bakersfield, CA Member No.: 4,499 Region Association: MidAtlantic Region ![]() |
Appreciate all the feedback. I'm definitely leaning toward a rebuild of the original 2.0. My biggest question right now is this: Given my car -- especially those of you who've seen it in person -- how important is originality? Should I have any second thoughts about building it into a 2056 or similar? While I'm very happy driving it stock, a couple dozen more HP certainly wouldn't hurt. (IMG:style_emoticons/default/smile.gif) Edit: And if I'm placing entirely too much emphasis on originality, should I ship away my core and drop in a 2270? My 73 2.0 has a McMark 2056 with dual carbs, and I live in Springfield VA too (almost in Burke actually), in case you'd like to see what the extra 30 hp feel like. We need us a NoVA/DC/MD get together anyway! Brent |
patrick3000 |
![]()
Post
#15
|
Member ![]() ![]() Group: Members Posts: 192 Joined: 19-July 06 From: Maryland Member No.: 6,468 ![]() |
Post a picture or two so we can have a look at its current condition. The cost effective solution is to source a used engine with good compression and leak down numbers and do a straight engine swap. If you are able to do some of the work yourself this can be completed for under 2K.
Another option is a full rebuild. Peak preformance in Lanham, MD has probably built more type four engines than anyone on the east coast. Tear the engine down to the long block and it is well inside your 5k budget. With there help I did my 912E engine including new Mahle P & C's and a Web cam for under 3K a few years ago. Spent a few extra $$$ on the while your in there stuff but that's another story. |
struckn |
![]()
Post
#16
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,069 Joined: 9-November 11 From: South Central York Pennsyvania Member No.: 13,764 Region Association: MidAtlantic Region ![]() |
Put it in an independent Porsche Shop that knows 914's and has a good reputation to protect. Give them a bugget and offer to pay part as thing progress to keep things moving, and don't be in a hurry.
Limit the total to what a rebuilt engine cost would go for plus allow for installation time and labor. You'll get a rebuilt original engine and a local Porsche 914 mechanic that will support you if things go bad, and who knows your car. He'll be able to tell you if there are other things that need doing and cut you some slack as a regular potential customer. Step away and when it's done you will have a reliable 914 that you can drive every where for years to come. Buying a rebuilt engine can be a gamble and you still have to get it running in the car. It's not as simple as it sounds, nor a quick fix. |
naro914 |
![]()
Post
#17
|
Losing my mind... ![]() ![]() ![]() ![]() Group: Members Posts: 2,476 Joined: 26-May 06 From: Charlotte, NC Member No.: 6,073 Region Association: South East States ![]() |
I believe in keeping everything all original and stock - no modifications should ever be done on a 914...ever....
oh wait, um...uh...ok. Scratch that.... Seriously.... Don't Park It Don't worry about originality unless it's a concours perfect show car. It's your car, do with it what YOU want, not what anyone else says you should... As far as advice goes, my opinion is either build the engine you want - stock or otherwise - or buy a recently rebuilt engine. If you buy a used engine, no matter who it's from or how good they say it is, you have the potential of being exactly in this same position in a very short time from now. ....Actually my advice is to drop a 3.2 engine in it, put GT flares, roll cage, race seats harnesses, coilovers, big sway bars....etc.... but that's a whole other topic of discussion.. (IMG:style_emoticons/default/happy11.gif) |
flipb |
![]()
Post
#18
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,810 Joined: 2-September 09 From: Fairfax, VA Member No.: 10,752 Region Association: MidAtlantic Region ![]() ![]() |
Really appreciate all the varied perspectives - part of what makes this such a great community.
I have a mechanic that I trust... a local father/son shop, the son drives a 914 of his own. I'm bringing it to them next week for the diagnosis. Expecting them to give me some options - having them rebuild it in-house or who they'd recommend (which, of course, I'll balance with what y'all recommend). Or maybe they'll tell me there's a 2.7 sitting in the back of their shop... (IMG:style_emoticons/default/happy11.gif) I'm feeling a lot better now. I now need to really figure out my budget before next week and then see what options that will leave on the table. |
flipb |
![]()
Post
#19
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,810 Joined: 2-September 09 From: Fairfax, VA Member No.: 10,752 Region Association: MidAtlantic Region ![]() ![]() |
Here's a link to a few highlight photos.
|
patrick3000 |
![]()
Post
#20
|
Member ![]() ![]() Group: Members Posts: 192 Joined: 19-July 06 From: Maryland Member No.: 6,468 ![]() |
That is a very nice car, I would keep her and find a good 2.0 motor and do a swap. Good luck with your decision if you need some help with an engine drop I would be glad to assist. And if you decide to sell I may be interested. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 9th May 2025 - 05:22 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |