 Right noid light or will any work?, D-jetronic |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Malpais82e |
 Jun 6 2013, 09:22 AM
Post
#1
|
|
Newbie  Group: Members Posts: 12 Joined: 4-June 13 From: Fort Collins Colorado Member No.: 15,968 Region Association: Rocky Mountains  |
Thanks to this forum, I found I need a noid light. (now I know what one is).
The ads say "for Bosche PFI", port fuel injection. Will any noid light work? I realize I may have to use pins/adapters to hook one up. I read the D-jetronic is 3 volts; don't know if other injection systems are the same. A search hasn't help on specific lights. Thanks, Gordon |
   |
 
|
  |
Replies(1 - 4)
| pcar916 |
Jun 6 2013, 09:40 AM
Post
#2
|
|
Is that a Lola? Group: Members Posts: 1,523 Joined: 2-June 05 From: Little Rock, AR Member No.: 4,188 Region Association: None 
|
QUOTE(Malpais82e @ Jun 6 2013, 10:22 AM)  A search hasn't help on specific lights. Many FLAPS rent/loan noid sets. One of them will likely work. My 993 injectors trigger at 3v, and I used a momentary 9v once to clear them of varnish. When I bought the engine in 1998 it had set up for two years. Good luck |
|
|
|
| stugray |
Jun 6 2013, 10:11 AM
Post
#3
|
|
Advanced Member Group: Members Posts: 3,825 Joined: 17-September 09 From: Longmont, CO Member No.: 10,819 Region Association: None |
You could use a bulb from a flashlight, they expect ~3Volts.
Or one 5cent LED with a 1k Resistor wired in series. A standard dash bulb would probably work as well, just might be hard to see. Stu |
|
|
|
| Cap'n Krusty |
Jun 6 2013, 10:36 AM
Post
#4
|
|
Cap'n Krusty Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California |
I'm pretty sure this one would be fine. Looks like the ones I've used over the years. I'm gonna replace the last one I had with either this one:
http://www.righttoolusa.com/p/Otc-7188-Bos...CFWKCQgodHFgAWw or this one: http://www.amazon.com/Lisle-27800-Universa...t/dp/B0002SR57Q (Probably the first one 'cause it's not likely I'll ever need one as fancy as the latter.) The Cap'n |
|
|
|
| Jon H. |
Jun 6 2013, 12:30 PM
Post
#5
|
|
Member Group: Members Posts: 242 Joined: 1-July 11 From: Ottawa, Canada Member No.: 13,264 Region Association: Canada |
I've used my test light with two stiff wires inserted into the plug, just make sure they don't touch each other.
Jon |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 02:34 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.