It's out of the garage, After some intense grinding |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
It's out of the garage, After some intense grinding |
skline |
Dec 30 2004, 02:09 PM
Post
#1
|
Born to Drive Group: Members Posts: 7,910 Joined: 26-December 02 From: Costa Mesa, CA Member No.: 17 Region Association: Southern California |
After some intense grinding on the front calipers, I pulled the car out of the garage for some last minute adjustments and double check what I can, I am getting ready to take her for her first drive around the block. Here she sits int he driveway outside the garage. I will do a little cleanup in the garage before putting her back in. And of course, I will take a video of it driving. I know you have all heard this before. Thank you goes out to Slits for the rear non leaking caliper. It came today first thing this morning. I need to adjust one of the front torsion bars also as it is leaning a little to the passenger side. Wish me luck, I am hoping nothing breaks.
Attached thumbnail(s) |
VegasRacer |
Dec 30 2004, 02:13 PM
Post
#2
|
ELVIRA Group: Benefactors Posts: 8,625 Joined: 27-March 03 From: Between Scylla and Charybdis Member No.: 481 Region Association: None |
|
Mueller |
Dec 30 2004, 02:13 PM
Post
#3
|
914 Freak! Group: Members Posts: 17,150 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None |
that looks like SUN.....what no storms down there right now???
good luck on your maiden voyage...don't go further than you can walk (IMG:http://www.914world.com/bbs2/html/emoticons/wacko.gif) |
aircooledboy |
Dec 30 2004, 02:55 PM
Post
#4
|
Sweet Pea's 1st ride in daddy's "vroom -vroom" Group: Members Posts: 1,672 Joined: 4-February 04 From: Rockford, IL Member No.: 1,629 Region Association: Upper MidWest |
I'm doing the wave for ya right now, right here in the office. 'Course it looks a little silly when its just me, but what the hell. (IMG:http://www.914world.com/bbs2/html/emoticons/w00t.gif)
GIVE ME AN "S". . . . , GIVE ME A "C". . . . . (IMG:http://www.914world.com/bbs2/html/emoticons/monkeydance.gif) Oh, and Mike's probably right on that walking thing. (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif) |
Allan |
Dec 30 2004, 03:02 PM
Post
#5
|
Teenerless Weenie Group: Members Posts: 8,373 Joined: 5-July 04 From: Western Mesopotamia Member No.: 2,304 Region Association: Southern California |
NICE!!! Let us know how it goes. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
|
skline |
Dec 30 2004, 03:06 PM
Post
#6
|
Born to Drive Group: Members Posts: 7,910 Joined: 26-December 02 From: Costa Mesa, CA Member No.: 17 Region Association: Southern California |
OK, I need to know if anyone off the top of thier head knows which way to turn the adjustment bolts on the torsion bar to get this to go up on the passenger side. As you can see in the picture, it leans a lot to the passenger side. Its too low and needs to come up. I have tried both directions and nothing seems to help. Which way do I turn it to get it to go up?
Attached thumbnail(s) |
Aaron Cox |
Dec 30 2004, 03:23 PM
Post
#7
|
Professional Lawn Dart Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California |
INDEX the tbar DOWN a spline or 2 (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif)
first time ive seen it out of the garage! wheres brittney to celebrate? (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) |
Howard |
Dec 30 2004, 03:57 PM
Post
#8
|
Incontin(g)ent Member Group: Benefactors Posts: 5,785 Joined: 24-July 03 From: Westlake Village, CA Member No.: 943 Region Association: None |
|
BIGKAT_83 |
Dec 30 2004, 04:44 PM
Post
#9
|
Senior Member Group: Members Posts: 1,798 Joined: 25-January 03 From: Way down south Bogart,GA Member No.: 194 Region Association: South East States |
Its been 3 hrs. How was it (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)
|
jim912928 |
Dec 30 2004, 06:32 PM
Post
#10
|
Senior Member Group: Members Posts: 1,486 Joined: 8-January 04 From: Granger, IN Member No.: 1,536 Region Association: Upper MidWest |
Scott,
Cranking the adjustment bolt clockwise will raise the car. Take the weight off of the front end when you adjust it as I've heard others have stripped the threads due to all the weight still being on it. Also, after adjusting lower the car and then make sure it settles (drive it, bounce it etc.) before you adjust it some more. |
spare time toys |
Dec 30 2004, 06:46 PM
Post
#11
|
hooked on grilling food. Group: Members Posts: 4,059 Joined: 3-April 04 From: West Plano Tx Member No.: 1,884 Region Association: Southwest Region |
Looking at the second picture I can tell it aint going nowhere..... Its still on jack stands in the ass end. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
|
Aaron Cox |
Dec 30 2004, 06:49 PM
Post
#12
|
Professional Lawn Dart Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California |
We need an update! hopefully the car didnt fall on him or something (IMG:http://www.914world.com/bbs2/html/emoticons/ohmy.gif)
scott - are you there? this is major tom to scotts chalon were coming out of shade..... and my car tilits in the most peculiar way, is it going to drive...todaaaaaaaaaaaayyyy this is major tom to scotts chalon (IMG:http://www.914world.com/bbs2/html/emoticons/tunez.gif) the gender bender himself would be proud (bowie) (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/givemebeer.gif) |
BIGKAT_83 |
Dec 30 2004, 07:00 PM
Post
#13
|
Senior Member Group: Members Posts: 1,798 Joined: 25-January 03 From: Way down south Bogart,GA Member No.: 194 Region Association: South East States |
Somethings wrong call 911 no posts in almost 4 hrs.
(IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) |
Aaron Cox |
Dec 30 2004, 07:02 PM
Post
#14
|
Professional Lawn Dart Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California |
serious.... maybe brittney stopped by (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
hope he be okay (IMG:http://www.914world.com/bbs2/html/emoticons/unsure.gif) |
spare time toys |
Dec 30 2004, 07:05 PM
Post
#15
|
hooked on grilling food. Group: Members Posts: 4,059 Joined: 3-April 04 From: West Plano Tx Member No.: 1,884 Region Association: Southwest Region |
Must have got it going and went for a spin past Britneys place to show it off. (IMG:http://www.914world.com/bbs2/html/emoticons/cool_shades.gif)
|
BIGKAT_83 |
Dec 30 2004, 07:14 PM
Post
#16
|
Senior Member Group: Members Posts: 1,798 Joined: 25-January 03 From: Way down south Bogart,GA Member No.: 194 Region Association: South East States |
Went to the store to buy some smokes???? (IMG:http://www.914world.com/bbs2/html/emoticons/mad.gif)
|
microsa |
Dec 30 2004, 07:20 PM
Post
#17
|
Member Group: Members Posts: 94 Joined: 20-February 03 From: San Antonio, Tx Member No.: 329 |
Possible broken torsion bar?
Life should not be a journey to the grave with the intention of arriving safely in an attractive, well-preserved body; rather you should skid in sideways, double cheeseburger in one hand, martini in the other, body thoroughly trashed, totally worn out, screaming, "Hoo-yah, what a ride! |
Howard |
Dec 30 2004, 07:31 PM
Post
#18
|
||
Incontin(g)ent Member Group: Benefactors Posts: 5,785 Joined: 24-July 03 From: Westlake Village, CA Member No.: 943 Region Association: None |
That wouldn't take him 4 hours (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) Where is the boy wonder??? |
||
skline |
Dec 30 2004, 07:38 PM
Post
#19
|
||
Born to Drive Group: Members Posts: 7,910 Joined: 26-December 02 From: Costa Mesa, CA Member No.: 17 Region Association: Southern California |
Funny you mention that. She is here now and took the video of the car moving on its own. As soon as I figure out how to post it, I will. I did drive the car today. Still needs lots of work though. Gotta pump the brakes to stop, and it still wont go in reverse. So I am going to make a new shift linkage. |
||
Gint |
Dec 30 2004, 08:25 PM
Post
#20
|
Mike Ginter Group: Admin Posts: 16,094 Joined: 26-December 02 From: Denver CO. Member No.: 20 Region Association: Rocky Mountains |
Yay! Scott!!!!!
|
Lo-Fi Version | Time is now: 31st October 2024 - 06:13 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |